杨文英科研成果

基本信息 科学研究 教育教学 论文专著 新建主栏目 基本信息 名称 杨文英，男，汉族，1982年生。博士，博士生导师，哈尔滨工业大学电气工程及自动化学院教授。 先后主持国家自然科学基金、教育部博士点基金、国家部委重点项目、预研基金、预研项目、创新基金等。 荣誉称号 名称 2011年 获哈尔滨工业大学“保密先进个人”称号 2012年 获哈尔滨工业大学“校级五好家庭”称号 2012年 获哈尔滨工业大学电气学院“保密先进个人”称号 2012年 获哈尔滨工业大学电气学院“优秀专兼职学生工作者”称号 2013年 获哈尔滨工业大学电气学院“教书育人优秀奖” 2013年 获哈尔滨工业大学电气学院“优秀专兼职学生工作者”称号 2015年 获哈尔滨工业大学电气学院“优秀指导教师”称号 2016年 获哈尔滨工业大学电气学院“教书育人优秀奖” 2021年 获哈尔滨工业大学“优秀党务工作者” 工作经历 名称 时间 工作经历 2021年12月至今2019年4月至今2015年12月至2021年12月2013年5月至今2010年3月至2015年12月 哈尔滨工业大学电气工程及自动化学院 教授哈尔滨工业大学电气工程及自动化学院 博士生导师哈尔滨工业大学电气工程及自动化学院 副教授哈尔滨工业大学电气工程及自动化学院 硕士生导师哈尔滨工业大学电气工程及自动化学院 讲师 教育经历 名称 2000年-2004年，哈尔滨工业大学测控技术与仪器专业， 获学士学位 2004年-2006年，哈尔滨工业大学飞行器设计专业， 获硕士学位 2006年-2009年，哈尔滨工业大学电机与电器专业， 获博士学位 2010年-2012年，哈尔滨工业大学仪器科学与技术学科， 博士后 2014年-2015年，加拿大阿尔伯塔大学， 访问学者 主要任职 名称 中国电子元件行业协会控制继电器分会 副秘书长 IEEE会员 奖项成果 奖项名称 新型大功率（JQ系列）交、直流接触器技术 获奖时间 2013.12 完成人 赵瑞平 杨文英 彭体康 邹明 秦志英 所获奖项 贵州省科技进步三等奖 简单介绍 科研项目 项目名称 高能电磁脉冲对永磁电器的干扰机理与分析方法研究 项目来源 国家自然科学基金项目 开始时间 2013.01 结束时间 2015.12 项目经费 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 项目名称 电磁脉冲对永磁电器干扰建模与分析方法研究 项目来源 国家教育部博士点基金 开始时间 2013.01 结束时间 2014.12 项目经费 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 项目名称 基于动态特性的永磁继电器抗电磁干扰性能分析及优化技术研究 项目来源 黑龙江省博士后基金项目 开始时间 2010.06 结束时间 2012.07 项目经费 担任角色 负责 项目类别 纵向项目 项目状态 完成 简单介绍 项目名称 三相交流密封接触器优化设计与研究 项目来源 贵州振华群英电器有限公司 开始时间 2011.07 结束时间 2013.12 项目经费 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 项目名称 继电器可靠性优化设计技术研发 项目来源 贵州振华群英电器有限公司 开始时间 2012.04 结束时间 2013.12 项目经费 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 项目名称 宇航用高可靠电磁继电器一致性稳健设计关键技术研究 项目来源 贵州振华群英电器有限公司 开始时间 2013.04 结束时间 2014.12 项目经费 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 研究领域 名称 电机与电器 主要研究方向: (1) 智能电器及其控制系统 (2) 多尺度多物理场建模与计算技术 (3) 高可靠电器稳健设计理论与优化技术 讲授课程 名称 1. 电器数值分析 简介: 研究生学位课 2. 电器设计与仿真 简介: 本科生选修课 出版物 出版物名称 航天电磁继电器三次设计 作者 梁慧敏 翟国富 叶雪荣 杨文英 周学 出版时间 2013年11月 出版社 哈尔滨工业大学出版社 简单介绍 论文期刊 论文标题 Nonlinear Axisymmetric Magnetostatic Analysis for Electromagnetic Device Using TLM-Based Finite-Element Method (SCI) 作者 Wenying Yang, Fei Peng, Venkata Dinavahi 发表时间 期刊名称 IEEE Transactions on Magnetics 期卷 53(4) 简单介绍 Finite-element method (FEM) has been widely used in industrial applications for many years. With the increase of finite-element model complexity and the number of elements, computation burden has become a serious issue and requires more attention. In this paper, the transmission line method (TLM) is adopted to the solution of FEM-based nonlinear axisymmetric magnetostatic problem and an equivalent finite-element network’s circuit model is given. Several methods were investigated to speed up the computation, such as Newton preconditioners, simplification of nonlinear equation solution and parallel computation. Compared with traditional Newton FEM iteration, our results show that the proposed method has more obvious advantages on computational efficiency at the same calculation accuracy. The method is applicable and valuable in the characteristic analysis and design of the magnetic device with a cylindrical structure. 论文标题 Simulation and Experimental Study of Thermal Effects on Composite Contacts in Electrical Life Cycle Tests of DC Relays (SCI) 作者 Wenying Yang, Dongyuan Li, Peng Liu, Zhuanke Chen, Guofu Zhai 发表时间 期刊名称 IEEE Transactions on Components, Packaging and Manufacturing Technology 期卷 5(6) 简单介绍 Composite contacts used for DC relays can help reduce their cost and the amount of precious metals used in their construction. Because of their electrical properties, silver metal oxide-copper (AgMeO-Cu) composite contacts are widely used; however, at heavy loads, the bonding strength of the composite contact will change due to the influence of uneven temperature and stress distributions, which may even cause failure in the form of oxide layer peeling. Here, typical AgSnO2In2O3-Cu composite contacts are studied. A 3D finite element simulation model that considers contact making, arcing, and breaking was established to calculate the contact temperature and thermal stress after any operation cycle. The model can be used to determine the variation of the contact temperature and thermal stress distributions vs. operation time during an electrical life cycle test. For different AgMeO layer@#%s thickness (0.25 mm and 0.38 mm)，the temperature and thermal stress distribution of composite contact@#%s bonding area were calculated under different current load levels: 30 A, 45 A and 60 A, while the load voltage is a constant 17 V. Results show that the thickness of the AgMeO layer has a significant effect on the temperature and stress distribution of the bonding area in the moveable contact and the composite contacts may more easily curl and crack with an increment of the AgMeO layer thickness under the same current condition. The simulation results agree well with the experimental data and the relative error is less than 10%. The validity of the model and method was verified. The numerical model in the paper may be used to analyze a composite contact@#%s properties and is therefore useful for design optimization and the selection of composite contact materials. 论文标题 Research on Dynamic Characteristics Optimization via Analytical Modeling for Typical Rotational Electromagnetic System (SCI) 作者 Wenying Yang, Peng Liu, Yingqi Wang, Ruoyao Li, Guofu Zhai 发表时间 期刊名称 IEEE Transactions on Magnetics 期卷 50(11) 简单介绍 As an analytical method with lumped parameters, the magnetic equivalent circuit method is usually constrained by its incapability of flux leakage and magnetic saturation compared with finite element (FE) method. We propose a new approach introducing compensation matrix Cm×n to combine both methods. It requires a certain number of feature points by FE to compensate flux leakage at different positions and saturation extents at different coil currents, result precision within 5% and only second time consumed. Then, the approach is applied in dynamic modeling, design refinement, and performance optimization, where repetitive calculation of electromagnetic character is needed, and the results indicate the feasibility of the approach. 论文标题 Optimization of Dynamic Characteristics for Electromagnetic Relay via Semi-Analytical Modeling (EI) 作者 Wenying YANG, Peng LIU, Ruoyao LI, Guofu ZHAI 发表时间 期刊名称 Proceedings of 5th International Conference of Reliability of Electro-technical Product & Electrical Contact 期卷 简单介绍 Generally dynamic characteristics of actuators such as electromagnetic relay can be solved with Finite Element (FE) method, of which the enormous calculation time consumed virtually prohibits its utility in handling optimization problems. In this paper a semi-analytical model was established based on Magnetic Equivalent Circuit (MEC) method and FE method. To achieve fast calculation Magnetic Equivalent Circuit (MEC) method is applied for electromagnetic system modeling. And to ensure accuracy, compensation matrix Cm×n is introduced to compensate the errors caused by flux leakage and saturation according to results obtained from the Finite Element (FE) method. As a counterpart Deformation Energy (DE) method is used for analytical modeling for mechanical system which includes mainly recoverable reed producing counter-force. Thus dynamic modeling and the subsequent dynamic parameters can be available by solving Ordinary Differential Equations (ODE) by 4th order Runge-Kutta method and the comparison with results from FE method indicates the feasibility and efficiency of the new approach. The breaking speed and closure speed of the contact, which are closely related to electrical arc making and contact loss caused by bounce respectively, are combined as an objective function to optimize with one of the stochastic approaches-Particle Swarm (PS) algorithm. Thus an optimum combination of input parameters can be obtained. The approach can also be applied in optimizations for other mechanical and electrical devices. 论文标题 Study on Distributed Digital Simulation Analysis System of Aerospace Electromagnetic Relay Based on Ethernet Network (EI) 作者 Wenying Yang, Guofu Zhai 发表时间 期刊名称 1st International Conference on Electric Power Equipment - Switching Technology, ICEPE2011 期卷 简单介绍 The design of aerospace electromagnetic relay is complicated and the process refers to the multi-fields problem including the kinematic, electricity, magnet and thermal. Aim to the problem, a new modeling language named RML and a distributed simulation method were proposed for the design of the aerospace electromagnetic relay. Through the secondary development of the related software, such as FLUX, ANSYS, ADAMS et al., the model of the relay built by RML could be recognized by any software above. The integrated simulation system of the aerospace electromagnetic relay was developed by the C%2B%2B Builder software. The system has the functions of the parameter design and kinematic analysis. The design and analysis of the relay are simplified for a certain extent when the system in the paper was adopted. The research in the paper is useful for the design of the digital analysis system of the other similar type switch apparatus. 论文标题 工频磁场对电磁继电器动态特性影响的三维有限元分析 (EI) 作者 杨文英，任万滨，翟国富，李岐新 发表时间 期刊名称 电工技术学报 期卷 26(1) 简单介绍 外部磁场对于电磁继电器动态特性的干扰,是研究继电器电磁兼容性的一个重要内容。本文以典型的拍合式电磁继电器为研究对象,针对其受到工频磁场干扰的情况,采用三维有限元方法建立了仿真模型。通过仿真计算,详细分析了继电器的吸合时间、电磁力矩、吸合速度以及吸合电流随外部工频磁场变化的规律,并定量给出了动态特性的各参数随磁场变化的曲线。实验结果和仿真分析结果符合得较好,从而验证了仿真分析的正确性。本文所得结论对于研究电磁继电器的电磁兼容性和抗干扰能力具有一定的借鉴意义。 论文标题 双继电器内部结构之间电磁干扰的有限元分析 (EI) 作者 杨文英，周学，翟国富 发表时间 期刊名称 电工技术学报 期卷 22(8) 简单介绍 以双电磁继电器功能模块为研究对象,建立了三种典型结构的三维有限元模型,定量分析了各种结构下,由于磁场窜扰引起的继电器静态和动态特性的变化。并针对每种结构下继电器的三种工作状态,从静态吸合力矩、动态吸合时间以及干扰力矩大小等多个方面,分析了两继电器之间的电磁干扰情况。继电器动态特性的仿真分析结果与实测数据具有很好的一致性。本文所得结论可指导双继电器电磁系统的优化设计,是研究多个继电器之间电磁干扰问题的基础。 论文标题 3-D finite element analysis of dynamic characteristics of twin-type relay interfered by uniform constant magnetic field (SCI) 作者 Guofu Zhai, Wenying Yang, Xue Zhou 发表时间 期刊名称 IEICE Transaction on Electronics 期卷 91(8) 简单介绍 Research on the electromagnetic compatibility of functional module composed of two independent electromagnetic relays in a hermetically sealed shell is the technical foundation for integration and miniaturization of electronic equipment in the future. In this paper, 3D finite element method (FEM) was used to analyze the dynamic characteristics of twin-type relay interfered by uniform constant magnetic field and identify the sensitive direction in which the relay was easily interfered. The models of twin-type relay in three working states were founded. Through simulation and analysis, it was found out how the operation time and electromagnetic torque of twin-type relay changed with the outer interfered magnetic field. When the relay was on the point of operation failure, the critical value of magnetic field was calculated through simulation. The simulation results of the dynamic characteristics of twin-type relay agree well with the experimental data. The conclusion in this paper is of great value for research on the electromagnetic compatibility of relay functional module. 论文标题 Influence of Electromagnetic Pulse on Electromagnetic Relay by Using Equivalent Circuit Model (EI) 作者 Bing Li, Wenying Yang, Fei Peng, Guofu Zhai 发表时间 期刊名称 26th International Conference on Electrical Contacts, ICEC 2012 期卷 简单介绍 Research on anti-interference capability of electromagnetic relay under electromagnetic pulse (EMP) is very important for assuring its reliable operation. In this paper, equivalent circuit of the relay was obtained, considering parasitic capacitance, inductance and resistance of electromagnetic system and contact system. The equivalent circuit is applied in a certain relay to analyze how the EMP interferes with inner structures, including coil, movable reeds and static reeds. The conclusion is valuable for improving the anti-interference capability of relay under EMP 论文标题 Reliability analysis of airport lighting aid system based on light source failure (EI) 作者 Sheng Cao, Wenying Yang, Guofu Zhai 发表时间 期刊名称 26th International Conference on Electrical Contacts, ICEC 2012 期卷 简单介绍 Airport Lighting Aid is important for guaranteeing Safety of planes@#% take-off and landing. This paper mainly analyzed the reliability of Airport Lighting System when light source fails. With the data obtained from airfield lighting station in an Airport in China, this paper predicted the reliability of every subsidiary system, built up the fault tree and calculated the reliability of airport lighting aid system. The conclusion in this paper is a useful reference for fault prediction and repairment of airport lighting aid system. 论文标题 Permanent-Magnet Equivalent Model of Calculating Relay@#%s Static Attractive Torque Characteristics by Finite Element Method (SCI) 作者 Guofu Zhai, Qiya Wang, Wenying Yang, Huimin Liang 发表时间 期刊名称 IEEE Transactions on Magnetics 期卷 48(9) 简单介绍 The permanent magnet (PM) is the key part of the relay. This paper aims to solve the problem of the uneven magnetization for the PM with nonlinear demagnetization curve after magnetizing and demagnetizing. A method partitioning the PM along the magnetization direction and the vertical direction of magnetization according to the condition of the specific magnetization of the PM was presented. By this method, the demagnetization model of the PM was built, the state of the PM magnetization was simulated under the demagnetizing magnetic intensity, and the recoil line and its initial point of each partition of the PM were obtained. Then the characteristic of the recoil line of each partition was used as its magnetic characteristic for the equivalent model of the PM to calculate the static torque characteristics under the demagnetizing magnetic field. Finally, the static torque characteristics of simulation and experiment were compared and the validity of the equivalent model presented was verified. 论文标题 继电器静态吸力(矩)特性有限元仿真中永磁体等效模型研究 (EI) 作者 翟国富，王其亚，杨文英，梁慧敏，王皞 发表时间 期刊名称 中国电机工程学报 期卷 30(33) 简单介绍 永磁体是含永磁继电器的关键部件。针对去磁曲线为非线性的永磁体,充、退磁后各部分磁化不均匀的问题,提出根据具体磁化情况沿磁化及垂直于磁化方向进行永磁分块等效的方法。该方法首先建立永磁的退磁模型,仿真某一退磁场作用下永磁的退磁状态,据此求得各永磁小块的回复线起始点及回复线,然后将各小块永磁体回复线特性作为其材料属性,进行该退磁场下的继电器静态吸力(矩)特性仿真的永磁模型等效。最后通过继电器静态吸力矩特性的仿真与实验结果对比,验证了所提等效模型的正确性。