谢聿铭科研成果

个人信息 学术论文 知识产权 新建主栏目 基本信息 名称 谢聿铭，工学博士，副教授/博士生导师，山东威海人。入选博新计划、春雁英才计划、新时代龙江优秀博士论文、哈工大优秀博士论文。工作于哈尔滨工业大学材料结构精密焊接与连接全国重点实验室黄永宪教授团队。围绕搅拌摩擦焊接及其衍生技术基础与应用开展研究，主要涉及焊接数值仿真、形变驱动冶金、搅拌摩擦增材制造等方面。近年来在Energy Storage Mater (IF=20.4)、Adv Sci (IF=15.1)、Compos Sci Technol、Addit Manuf、Corros Sci、Scripta Mater、Weld J等期刊发表SCI文章60余篇（ESI高被引5篇、封面2篇），SCI引用2200余次，H因子25，申报发明专利59项，已授权39项，登记软件著作权8项，副主编《Friction Stir Welding and Processing》英文专著，参编搅拌摩擦焊接领域学术专著2部，主持国家自然科学基金青年科学基金项目、博新计划基金、中国博士后面上基金（一等）等项目，参与国家重点研发计划、国家自然科学基金等项目，获省部级科学技术进步二等奖、省高等教育教学成果二等奖，省高校科学技术一等奖。 更多详情，请见团队主页：http://www.hitfswp.com/ 所在团队成员： 黄永宪 教授——http://homepage.hit.edu.cn/hyxhit 吕世雄 教授级高级工程师 万龙 教授——http://homepage.hit.edu.cn/LWAN 孟祥晨 研究员——http://homepage.hit.edu.cn/MengXiangchen 谢聿铭 副教授——http://homepage.hit.edu.cn/ymxie 马潇天 博士后 王乃婕 博士后 崔冠男 工程师 教育经历 名称 2012.09-2016.09，哈尔滨工业大学，焊接技术与工程，工学学士，导师：黄永宪 教授 2016.09-2018.09，哈尔滨工业大学，材料加工工程，工学硕士，导师：黄永宪 教授 2018.09-2022.03，哈尔滨工业大学，材料加工工程，工学博士，导师：黄永宪 教授、董志波 教授 工作经历 名称 2022.04-至今，哈尔滨工业大学，控制科学与工程博士后流动站，博新/春雁英才博士后，合作导师：吴立刚 教授 2022.04-2023.12，哈尔滨工业大学，材料科学与工程学院，助理教授（专业技术职务：讲师） 2023.03-至今，哈尔滨工业大学，材料科学与工程学院，硕士生导师 2024.01-至今，哈尔滨工业大学，材料科学与工程学院，副教授（青年拔尖） 2024.03-至今，哈尔滨工业大学，材料科学与工程学院，博士生导师 科研项目 名称 1. 国家自然科学基金青年科学基金项目，30万元，主持 2. 中国博士后科学基金会博士后创新人才支持计划，23万元，主持 3. 中国博士后科学基金第72批面上资助（一等），12万元，主持 4. 黑龙江省自然科学基金联合引导项目，10万元，主持 5. 黑龙江省博士后科学基金面上资助，10万元，主持 6. 新时代龙江优秀博士论文资助，5万元，主持 7. 先进焊接与连接国家重点实验室自主课题，10万元，主持 学术兼职与期刊审稿 名称 1. Guest Editor: Coatings—Friction and Friction-Based Techniques（投稿网址） 2. Coordinator：Frontiers in Materials—Joining and Welding of New and Dissimilar Materials Volume II（投稿网址） 3. 客座编辑：《焊接学报》特邀专刊——搅拌摩擦焊接及其衍生技术 4. 期刊审稿人：Mater Res Lett、Mater Des、J Mater Process Technol、J Mater Res Technol、J Manuf Process、Thin Wall Struct、Mater Lett、Adv Eng Mater、Metall Mater Trans A等 荣誉奖励 名称 1. 新时代龙江优秀博士论文，2022 2. 省部级科学技术进步二等奖（5/8），2022 3. 黑龙江省研究生导学思政团队（导师）建设项目（5/8），2022 4. 哈尔滨工业大学优秀博士论文，2022 5. 黑龙江省高等教育教学成果二等奖（4/8），2022 6. 哈尔滨工业大学优秀教学成果一等奖（4/9），2022 7. 中国博士后创新人才支持计划，2022 8. 哈尔滨工业大学春雁英才计划，2021 9. 博士研究生国家奖学金，2020 10. 黑龙江省高校科学技术一等奖（3/7），2020 11. 工信部创业奖学金特等奖，2017 代表作 名称 1. Yuming Xie#, Xiangchen Meng#, Yuexin Chang, Dongxin Mao, Zhiwei Qin, Long Wan, Yongxian Huang*. Heteroatom modification enhances corrosion durability in high-mechanical-performance graphene-reinforced aluminum matrix composites. Advanced Science, 2022, 9: 2104464. (DOI: 10.1002/advs.202104464, IF=17.521，ESI高被引) 2. Yuming Xie#, Xiangchen Meng#, Zhiwei Qin, Yuexin Chang, Dongxin Mao, Long Wan, Yongxian Huang*. Reversible passivation in primary aluminum-air batteries via composite anodes. Energy Storage Materials, 2022, 49: 537-545. (DOI: 10.1016/j.ensm.2022.05.004, IF=20.831) 3. Yuming Xie#, Xiangchen Meng#, Yuexin Chang, Dongxin Mao, Yuchen Yang, Yanli Xu, Long Wan*, Yongxian Huang*. Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy. Composites Science and Technology, 2022, 219: 109225. (DOI: 10.1016/j.compscitech.2021.109225, IF=9.879，ESI高被引) 4. Yuming Xie#, Xiangchen Meng#*, Feifan Wang, Yimeng Jiang, Xiaotian Ma, Long Wan, Yongxian Huang*. Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering. Corrosion Science, 2021, 192: 109800. (DOI: 10.1016/j.corsci.2021.109800, IF=7.72，ESI高被引) 5. Yuming Xie#, Xiangchen Meng#, Dongxin Mao, Zhiwei Qin, Long Wan, Yongxian Huang*. Homogeneously dispersed graphene nanoplatelets as long-term corrosion inhibitors for aluminum matrix composites. ACS Applied Materials & Interfaces, 2021, 13(27): 32161-32174. (DOI: 10.1021/acsami.1c07148, IF=10.383，ESI高被引) 6. Yuming Xie#, Xiangchen Meng#, Yulong Li, Dongxin Mao, Long Wan, Yongxian Huang*. Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy. Composites Communications, 2021, 26: 100776. (DOI: 10.1016/j.coco.2021.100776, IF=7.685，ESI高被引) 更多信息，请见个人Researchgate主页。 2024年 名称 1. Wei Wang, Xiangchen Meng*, Wenjiang Dong, Yuming Xie*, Xiaotian Ma, Dongxin Mao, Zeyu Zhang, Yongxian Huang*. In-situ rolling friction stir welding of aluminum alloys towards corrosion resistance. Corrosion Science, 2024, Pre-proof. (DOI: 10.1016/j.corsci.2024.111920) 2023年 名称 1. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Delai Qian, Cheng Shan, Gang He, Long Wan, Yongxian Huang*. Suppressing lithium dendrite growth enabled by high-performance garnet LLZO for graphite-based full cell solid-state lithium batteries. Journal of Physics and Chemistry of Solids, 2024, 185: 111789. (DOI: 10.1016/j.jpcs.2023.111789) 2. Cheng Shan#, Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Jialin Chen, Yuexin Chang, Ranzhuoluo Zang, Long Wan, Yongxian Huang*. Cu-CNTs current collector fabricated by deformation-driven metallurgy for anode-free Li metal batteries. Carbon, 2023, 204: 367-376. (DOI: 10.1016/j.carbon.2022.12.074, IF=11.307) 3. Dongxin Mao#, Xiangchen Meng#, Yuming Xie#, Yuexin Chang, Zhiwei Qin, Shuangming Xu, Long Wan, Yongxian Huang*. Back stress dynamic balancing strategy enabled strength-ductility synergy in heterostructured Al-SiC composites. Science China Materials. 2022, 66: 1649-1658. (DOI: 10.1007/s40843-022-2271-2, IF=8.640) 4. Xiangchen Meng#, Yuming Xie#, Xiaotian Ma#, Mingyang Liang, Xiaoyang Peng, Shiwei Han, Lei Kan, Xin Wang, Sihao Chen, Yongxian Huang*. Towards friction stir remanufacturing of high-strength aluminum components. Acta Metallurgica Sinica (English Letters), 2023, 36: 91-102. (DOI: 10.1007/s40195-022-01444-0, IF=3.024) 5. Xiangchen Meng, Shuming Sun, Xinyu Liang, Dongliang Ren, Mingyang Liang, Xiaoyang Peng, Shiwei Han, Yuming Xie*, Yongxian Huang. Sleeve friction stud welding towards formation and property. Materials Letters, 2023, 352: 135180. (DOI: 10.1016/j.matlet.2023.135180, IF=3.0) 6. Huizi Chen, Xiangchen Meng, Jialin Chen, Yuming Xie, Jinqi Wang, Shuming Sun, Yaobang Zhao, Junchen Li, Long Wan, Yongxian Huang*. Wire-based friction stir additive manufacturing. Additive Manufacturing. 2023, 70: 103557. (DOI: 10.1016/j.addma.2023.103557, IF=11.632) 7. Xiangchen Meng, Yuming Xie, Shuming Sun, Xiaotian Ma, Long Wan, Jian Cao, Yongxian Huang*. Lightweight design: friction-based welding between metal and polymer. Acta Metallurgica Sinica. 2023, 36: 881-898. (DOI: 10.1007/s40195-023-01552-5, IF=3.024) 8. Yongxian Huang*, Zhiwei Qin, Cheng Shan, Yuming Xie, Xiangchen Meng, Delai Qian, Gang He, Dongxin Mao, Long Wan. Green recycling of short-circuited garnet-type electrolyte for high-performance solid-state lithium batteries. Journal of Energy Chemistry, 2023, 80: 492-500. (DOI: 10.1016/j.jechem.2023.01.057, IF=13.599) 2022年 名称 1. Yuming Xie#, Xiangchen Meng#, Zhiwei Qin, Yuexin Chang, Dongxin Mao, Long Wan, Yongxian Huang*. Reversible passivation in primary aluminum-air batteries via composite anodes. Energy Storage Materials, 2022, 49: 537-545. (DOI: 10.1016/j.ensm.2022.05.004, IF=20.831) 2. Yuming Xie#, Xiangchen Meng#, Yuexin Chang, Dongxin Mao, Zhiwei Qin, Long Wan, Yongxian Huang*. Heteroatom modification enhances corrosion durability in high-mechanical-performance graphene-reinforced aluminum matrix composites. Advanced Science, 2022, 9: 2104464. (DOI: 10.1002/advs.202104464, IF=17.521) 3. Yuming Xie#, Xiangchen Meng#, Yuexin Chang, Dongxin Mao, Yuchen Yang, Yanli Xu, Long Wan*, Yongxian Huang*. Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy. Composites Science and Technology, 2022, 219: 109225. (DOI: 10.1016/j.compscitech.2021.109225, IF=9.879) 4. Yuming Xie#, Xiangchen Meng#, Dongxin Mao, Yuexin Chang, Zhiwei Qin, Xiaotian Ma, Long Wan, Yongxian Huang*. Deformation-driven modification of Al-Li-Mg-Zn-Cu high-alloy aluminum as anodes for primary aluminum-air batteries. Scripta Materialia, 2022, 212: 114551. (DOI: 10.1016/j.scriptamat.2022.114551, IF=6.302) 5. Yuming Xie#, Xiangchen Meng#, Ranzhuoluo Zang, Yuexin Chang, Long Wan, Yongxian Huang*. Deformation-driven modification towards strength-ductility enhancement in Al-Li-Mg-Zn-Cu lightweight high-entropy alloys. Materials Science and Engineering A, 2022, 830: 142332. (DOI: 10.1016/j.msea.2021.142332, IF=6.044) 6. Yuming Xie, Xiangchen Meng, Yongxian Huang*. Entire-process simulation of friction stir welding, Part 1: Experiments and simulation. Welding Journal, 2022, 5:144-s-159-s. (DOI: 10.29391/2022.101.011, IF=2.217) 7. Yuming Xie, Xiangchen Meng, Yongxian Huang*. Entire-process simulation of friction stir welding, Part 2: Implementation of neural networks. Welding Journal, 2022, 6:172-s-177-s. (DOI: 10.29391/2022.101.013, IF=2.217) 8. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Delai Qian, Dongxin Mao, Xiaotian Ma, Cheng Shan, Jialin Chen, Long Wan, Yongxian Huang*. Recycling garnet-type electrolyte toward superior cycling performance for solid-state lithium batteries, Energy Storage Materials, 2022, 49: 360-369. (DOI: 10.1016/j.ensm.2022.04.024, IF=20.831) 9. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Delai Qian, Cheng Shan, Dongxin Mao, Gang He, Zhen Zheng, Long Wan, Yongxian Huang*. Interface engineering for garnet-type electrolyte enables low interfacial resistance in solid-state lithium batteries. Chemical Engineering Journal, 2022, 447: 137538. (DOI: 10.1016/j.cej.2022.137538, IF=16.744) 10. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Delai Qian, Dongxin Mao, Zhen Zheng, Long Wan, Yongxian Huang*. Grain Boundary Engineering in Ta-Doped Garnet-Type Electrolyte for Lithium Dendrite Suppression. ACS Applied Materials and Interfaces, 2022, 14: 40959-40966. (DOI: 10.1021/acsami.2c10027, IF=10.383) 11. Dongxin Mao#, Xiangchen Meng#, Yuming Xie#, Yuchen Yang, Yanli Xu, Zhiwei Qin, Yuexin Chang, Long Wan*, Yongxian Huang*. Strength-ductility balance strategy in SiC reinforced aluminum matrix composites via deformation-driven metallurgy. Journal of Alloys and Compounds, 2022, 891: 162078. (DOI: 10.1016/j.jallcom.2021.162078, IF=6.371) 12. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Cheng Shan, Gang He, Delai Qian, Dongxin Mao, Long Wan, Yongxian Huang*. High cycling stability enabled by Li vacancy regulation in Ta-doped garnet-type solid-state electrolyte. Journal of the European Ceramic Society, 2022, 43: 2023-2032. (DOI: 10.1016/j.jeurceramsoc.2022.12.028, IF=6.364) 13. Ranzhuoluo Zang#, Yuming Xie#, Jinglin Liu#, Xiangchen Meng, Yongxian Huang*, Long Wan*. Achieving high-quality tungsten-copper composites via deformation-driven metallurgy. Metallurgical and Materials Transactions A, 2022, 53: 3210-3215. (DOI: 10.1007/s11661-022-06740-z, IF=2.726) 14. Huankun Deng#, Yuming Xie#, Xiangchen Meng#, Huizi Chen, Ranzhuoluo Zang, Yuexin Chang, Xuan Li, Long Wan, Yongxian Huang*. Improving tensile-shear strength of friction stir lap welded joints of light-weight Mg-Li/Mg-Al-Zn alloys. Welding in the World, 2022, 66: 1775-1780. (DOI: 10.1007/s40194-022-01341-1, IF=1.984) 15. Yan Cui#, Chong Li#, Zenglou Li, Xiaojie Yao, Wenbo Hao, Songling Xing, Yuming Xie*, Xiangchen Meng, Long Wan, Yongxian Huang*. Deformation-driven processing of CNTs/PEEK composites towards wear and tribology applications. Coatings, 2022, 12: 983. (DOI= 10.3390/coatings12070983, IF=3.236) 16. Jinglin Liu#, Zilin Hao#, Yuming Xie, Xiangchen Meng, Yongxian Huang, Long Wan*. Interface stability and fracture mechanism of Al/Steel friction stir lap joints by novel designed tool. Journal of Materials Processing Technology, 2022, 300: 117425. (DOI: 10.1016/j.jmatprotec.2021.117425, IF=6.162) 17. Xiaotian Ma, Xiangchen Meng, Yuming Xie, Yaobang Zhao, Xiaoyang Peng, Mingyang Liang, Dongxin Mao, Long Wan, Yongxian Huang*. Elimination of root kissing bond in friction stir welding of thick plates. Materials Letters. 2022, 328: 133148. (DOI: 10.1016/j.matlet.2022.133148, IF=3.574) 18. Zilin Hao#, Xuan Li#, Jinglin Liu#, Yuming Xie, Qi Wen, Xiangchen Meng, Yongxian Huang*, Long Wan*. Expanding-Welding: A hybrid deformation and welding process for joining dissimilar metals. Journal of Materials Processing Technology, 2022, 303: 117535. (DOI: 10.1016/j.jmatprotec.2022.117535, IF=6.162) 19. Zhiwei Qin, Li Zhou*, Shan Liu, Xiangchen Meng, Junchen Li, Yuming Xie, Xiaoguo Song, Hongming Zhang, Yongxian Huang*. High pressure-amplitude ratio ultrasonic spot welding of thermoplastic carbon fiber-reinforced epoxy. Advanced Engineering Materials, 2022, 24: 2100706. (DOI: 10.1002/adem.202100706. IF=4.122) 20. Huizi Chen, Jialin Chen, Shuangming Xu, Yaobang Zhao, Xiangchen Meng, Yuming Xie, Yongxian Huang*. Wire-based friction stir additive manufacturing towards field repairing. Welding Journal, 2022, 9: 249-s-252-s. (DOI: 10.29391/2022.101.019, IF=2.217) 21. Xiaotian Ma, Shuangming Xu, Feifan Wang, Yaobang Zhao, Xiangchen Meng*, Yuming Xie, Long Wan, Yongxian Huang. Effect of temperature and material flow gradients on mechanical performances of friction stir welded AA6082-T6 joints. Materials. 2022: 15: 6579. (DOI: 10.3390/ma15196579, IF=3.748) 22. Tifang Huang#, Zeyu Zhang#, Jinglin Liu, Sihao Chen, Yuming Xie, Xiangchen Meng, Yongxian Huang*, Long Wan*. Interface formation of medium-thick AA6061 Al/AZ31B Mg dissimilar submerged friction stir welding joints. Materials, 2022, 15(16): 5520. (DOI: 10.3390/ma15165520, IF=3.748) 23. 王非凡*, 谢聿铭, 吴会强, 马飞, 黄永宪. 2219铝合金FSW及TIG接头力学及腐蚀行为对比. 焊接学报, 2022, 43(06): 43-49. 24. 陈会子, 孟祥晨, 陈佳霖, 谢聿铭, 赵耀邦, 黄永宪*. 铝合金连续进给搅拌摩擦增材制造技术. 焊接学报, 2022, 43(11): 63-67+166. 25. Wei Wang, Peng Li, Xiangchen Meng, Yuming Xie, Dongxin Mao, Zeyu Zhang, Yongxian Huang*. High-strength friction stir welding of selective laser melted AlSi10Mg alloys. China Welding, 2022, 31(04): 23-27. 2021年 名称 1. Yuming Xie#, Xiangchen Meng#, Dongxin Mao, Zhiwei Qin, Long Wan, Yongxian Huang*. Homogeneously dispersed graphene nanoplatelets as long-term corrosion inhibitors for aluminum matrix composites. ACS Applied Materials & Interfaces, 2021, 13(27): 32161-32174. (DOI: 10.1021/acsami.1c07148, IF=10.383) 2. Yuming Xie#, Xiangchen Meng#*, Feifan Wang, Yimeng Jiang, Xiaotian Ma, Long Wan, Yongxian Huang*. Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering. Corrosion Science, 2021, 192: 109800. (DOI: 10.1016/j.corsci.2021.109800, IF=7.72) 3. Yuming Xie#, Xiangchen Meng#, Yulong Li, Dongxin Mao, Long Wan, Yongxian Huang*. Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy. Composites Communications, 2021, 26: 100776. (DOI: 10.1016/j.coco.2021.100776, IF=7.685) 4. Zhiwei Qin#, Yuming Xie#, Xiangchen Meng#, Delai Qian, Junchen Li, Chun Li, Jian Cao, Long Wan, Yongxian Huang*. Oriented attachment strategy toward enhancing ionic conductivity in garnet-type electrolytes for solid-state lithium batteries. ACS Applied Materials & Interfaces, 2021, 13(29): 34385-34396. (DOI: 10.1021/acsami.1c08729, IF=10.383) 5. Xiaotian Ma#, Yuming Xie#, Xiangchen Meng, Huizi Chen, Feifan Wang, Yimeng Jiang, Long Wan, Yongxian Huang*. Stepped-shoulder friction stir welding to alleviate weld thinning for dissimilar AA2195-T8/AA2219-T6 alloys. Science and Technology of Welding and Joining, 2021, 26: 599-605 (DOI: 10.1080/13621718.2021.1982341, IF=4.114) 6. Zhiwei Qin#, Xiangchen Meng#, Yuming Xie, Delai Qian, Huankun Deng, Dongxin Mao, Long Wan, Yongxian Huang*. Fast Li-ion transport pathways via 3D continuous networks in homogeneous garnet-type electrolyte for solid-state lithium batteries. Energy Storage Materials, 2021, 43: 190-201. (DOI: 10.1016/j.ensm.2021.09.005, IF=20.831) 7. Xiangchen Meng*, Bingqi Cao, Yang Qiu, Huizi Chen, Yuming Xie, Long Wan, Yongxian Huang*. Equal-load-bearing joining of alclad AA2024-T4 alloy stringers and skins in aviation via friction stir lap welding. Journal of Manufacturing Processes, 2021, 68: 1295-1302. (DOI: 10.1016/j.jmapro.2021.06.043, IF=5.684) 8. Huizi Chen#, Jian Wang#, Xiangchen Meng#, Yuming Xie, Yulong Li, Long Wan, Yongxian Huang*. Ultrafine-grained Mg-Zn-Y-Zr alloy with remarkable improvement in superplasticity. Materials Letters, 2021, 303: 130524. (DOI: 10.1016/j.matlet.2021.130524, IF=3.574) 2020年 名称 1. Yuming Xie, Yongxian Huang*, Xiangchen Meng, Junchen Li, Jian Cao*. Friction stir spot welding of aluminum and wood with polymer intermediate layers. Construction and Building Materials, 2020, 240: 117952. (DOI: 10.1016/j.conbuildmat.2019.117952, IF=7.693) 2. Yuming Xie, Yongxian Huang*, Xiangchen Meng, Feifan Wang, Long Wan, Zhibo Dong, Jian Cao. Friction rivet joining towards high-performance wood-metal hybrid structures. Composite Structures, 2020, 247: 112472. (DOI: 10.1016/j.compstruct.2020.112472, IF=6.603) 3. Yuming Xie, Yongxian Huang*, Feifan Wang, Xiangchen Meng, Junchen Li, Zhibo Dong, Jian Cao. Deformation-driven metallurgy of SiC nanoparticle reinforced aluminum matrix nanocomposites. Journal of Alloys and Compounds, 2020, 823: 153741. (DOI: 10.1016/j.jallcom.2020.153741, IF=6.371) 4. Yanxin Zhang, Yongxian Huang*, Xiangchen Meng, Junchen Li, Yuming Xie, Qiang Fan. Friction stir lap welding of AA2024-T4 with drastically different thickness. The International Journal of Advanced Manufacturing Technology, 2020, 106: 3683-3691. (DOI: 10.1007/s00170-019-04865-x, IF=3.563) 5. Yanchao Liu, Yongxian Huang*, Meng Guan, Xiangchen Meng, Yuming Xie. Grain refinement in surficial cryogenic grinding. Metallurgical and Materials Transactions A, 2020, 51: 3349-3353. (DOI: 10.1007/s11661-020-05765-6, IF=2.726) 2019年 名称 1. Yuming Xie#, Xiangchen Meng#, Yongxian Huang#*, Junchen Li, Jian Cao*. Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility. Composites Part B, 2019, 177: 107413. (DOI: 10.1016/j.compositesb.2019.107413, IF=11.322) 2. Yongxian Huang*, Yuming Xie, Xiangchen Meng, Junchen Li, Li Zhou*. Joint formation mechanism of high depth-to-width ratio friction stir welding. Journal of Materials Science & Technology, 2018, 35: 1261-1269. (DOI: 10.1016/j.jmst.2019.01.016, IF=10.319) 3. Yongxian Huang*, Yuming Xie, Xiangchen Meng, Junchen Li. Atypical grain coarsening of friction stir welded AA6082-T6: Characterization and modeling. Materials Science and Engineering A, 2019, 740-741: 211-217. (DOI: 10.1016/j.msea.2018.10.109, IF=6.044) 4. Yongxian Huang*, Xiangchen Meng, Yuming Xie, Junchen Li, Long Wan. New technique of friction-based filling stacking joining for metal and polymer. Composites Part B, 2019, 163: 217-223. (DOI: 10.1016/j.compositesb.2018.11.050, IF=11.322) 5. Xiangchen Meng, Yongxian Huang*, Yuming Xie, Junchen Li, Meng Guan, Long Wan, Zhibo Dong, Jian Cao. Friction self-riveting welding between polymer matrix composites and metals. Composites Part A, 2019, 127: 105624. (DOI: 10.1016/j.compositesa.2019.105624, IF=9.463) 6. Yongxian Huang*, Xiangchen Meng, Yuming Xie, Junchen Li, Xiaoqing Si, Qiang Fan. Improving mechanical properties of composite/metal friction stir lap welding joints via a taper-screwed pin with triple facets. Journal of Materials Processing Technology, 2019, 268: 80-86. (DOI: 10.1016/j.jmatprotec.2019.01.011, IF=6.162) 7. Junchen Li, Yongxian Huang*, Xiangchen Meng, Yuming Xie. A review on high entropy alloys coatings: fabrication processes and property assessment. Advanced Engineering Materials, 2019, 21: 1900343. (DOI: 10.1002/adem.201900343, IF=4.122) 8. Xiangchen Meng, Yongxian Huang*, Shuai Liu, Yuming Xie, Junchen Li, Li Zhou*. Functionally gradient coating of aluminum alloy via in situ arc surface nitriding with subsequent friction stir processing. Advanced Engineering Materials, 2019, 21: 1800841. (DOI: 10.1002/adem.201800841, IF=4.122) 9. Meng Guan, Yuhua Wang, Yongxian Huang*, Xin Liu, Xiangchen Meng, Yuming Xie, Junchen Li. Non-weld-thinning friction stir welding. Materials Letter, 2019, 255: 126506. (DOI: 10.1016/j.matlet.2019.126506, IF=3.574) 10. Yongxian Huang*, Long Wan, Xiaoqing Si, Tifang Huang, Xiangchen Meng, Yuming Xie. Achieving high-quality Al/steel joint with ultrastrong interface. Metallurgical and Materials Transactions A, 2019, 50: 295-299. (DOI: 10.1007/s11661-018-5006-4, IF=2.726) 11. 黄永宪*, 陈磊, 谢聿铭, 孟祥晨. 搅拌摩擦焊缝缺陷固相修复技术研究进展. 辽宁石油化工大学学报, 2019, 39(02): 88-93. 2018年 名称 1. Yongxian Huang*, Yuming Xie, Xiangchen Meng, Zongliang Lv, Jian Cao. Numerical design of high depth-to-width ratio friction stir welding. Journal of Materials Processing Technology, 2018, 252: 233-241. (DOI: 10.1016/j.jmatprotec.2017.09.029, IF=6.162) 2. Yongxian Huang*, Xiangchen Meng, Yuming Xie, Long Wan, Zongliang Lv, Jian Cao, Jicai Feng. Friction stir welding/processing of polymers and polymer matrix composites. Composites Part A, 2018, 105: 235-257. (DOI: 10.1016/j.compositesa.2017.12.005, IF=9.463) 3. Yongxian Huang*, Xiangchen Meng, Yuming Xie, Junchen Li, Long Wan. Joining of carbon fiber reinforced thermoplastic and metal via friction stir welding with co-controlling shape and performance. Composites Part A, 2018, 112: 328-336. (DOI: 10.1016/j.compositesa.2018.06.027, IF=9.463) 4. Yongxian Huang*, Xiangchen Meng, Yuming Xie, Zongliang Lv, Long Wan, Jian Cao, Jicai Feng. Friction spot welding of carbon fiber-reinforced polyetherimide laminate. Composite Structures, 2018, 189: 627-634. (DOI: 10.1016/j.compstruct.2018.02.004, IF=6.603) 5. Yongxian Huang*, Xiangchen Meng, Yuhua Wang, Yuming Xie, Li Zhou. Joining of aluminum alloy and polymer via friction stir lap welding. Journal of Materials Processing Technology, 2018, 257: 148-154. (DOI: 10.1016/j.jmatprotec.2018.02.043, IF=6.162) 6. Yongxian Huang*, Long Wan, Xiangchen Meng, Yuming Xie, Zongliang Lv, Li Zhou*. Probe shape design for eliminating the defects of friction stir lap welded dissimilar materials. Journal of Manufacturing Processes, 2018, 35: 420-427. (DOI: 10.1016/j.jmapro.2018.08.026, IF=5.684) 7. Yongxian Huang*, Junchen Li, Long Wan, Xiangchen Meng, Yuming Xie. Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing. Materials Science and Engineering A, 2018, 732: 205-211. (DOI: 10.1016/j.msea.2018.07.011, IF=6.044) 8. Xiangchen Meng, Zheng Xu, Yongxian Huang*, Yuming Xie, Yaobin Wang, Long Wan, Zongliang Lv, Jian Cao. Interface characteristic and tensile property of friction stir lap welding of dissimilar aircraft 2060-T8 and 2099-T83 Al–Li alloys. The International Journal of Advanced Manufacturing Technology, 2018, 94: 1253-1261. (DOI: 10.1007/s00170-017-0996-4, IF=3.563) 授权发明专利 名称 1. 谢聿铭, 黄永宪, 孟祥晨, 万龙. 一种用于电子封装的微搅拌摩擦焊接工艺. ZL202010065219.5, 申请2020.01.20, 授权2021.10.19. 2. 谢聿铭, 黄永宪, 孟祥晨, 冒冬鑫. 耐蚀铝碳复合材料及其制备方法. ZL202210624205.1, 申请2022.06.02, 授权2022.10.28. 3. 谢聿铭, 黄永宪, 孟祥晨, 马潇天, 万龙. 一种点承载面密封的复合连接工艺. ZL202210510979.1, 申请2022.05.12, 授权2023.01.03. 4. 谢聿铭, 黄永宪, 孟祥晨, 冒冬鑫. 多主元氧化物弥散强化超细晶铝基复合材料及其制备方法. ZL202210544292.X, 申请2022.05.19, 授权2023.01.03. 5. 谢聿铭，黄永宪，孟祥晨，燕泊衡，张润峰，张泽宇. 一种机器人连续送丝搅拌摩擦增材装置及曲面增材方法. ZL202211423329.X, 申请2022.11.15, 授权2023.04.14. 6. 谢聿铭, 刘恒良, 黄永宪, 孟祥晨, 孙秀文, 王劲棋. 一种搅拌摩擦隧道成形装置及方法. ZL202211373851.1, 申请2022.11.04, 授权2023.06.23. 7. 谢聿铭, 黄永宪, 孟祥晨, 燕泊衡. 一种搅拌摩擦增材工具轴向推力强化结构及其制备方法. CN202211302531.7, 申请2022.10.24, 授权2023.07.25. 8. 谢聿铭, 黄永宪, 孟祥晨, 王祎然, 陈会子. 一种浮动式固相增材修复装置及方法. ZL202211396797.2, 申请2022.11.09, 授权2023.08.08. 9. 谢聿铭, 黄永宪, 孟祥晨, 张润峰. 一种旋铡式搅拌摩擦增材制造装置及方法. ZL202211346725.7, 申请2022.10.31, 授权2023.09.05. 10. 谢聿铭, 黄永宪, 孟祥晨, 陈会子, 孙秀文, 王劲棋. 一种金属基复合材料粉芯丝材固相增材制造装置及方法. ZL202211302504.X, 申请2022.10.24, 授权2023.10.31. 11. 谢聿铭，刘恒良，黄永宪，孟祥晨，詹介彬. 一种铝铜复合液冷通道结构一体成形装置及方法. ZL202211393147.2, 申请2022.11.08, 授权2024.01.12. 12. 黄永宪, 谢聿铭, 于江祥, 孟祥晨, 陈磊. 一种实现大深宽比低阻抗焊接的搅拌摩擦焊焊具. ZL201910221955.2, 申请2019.03.22, 授权2021.03.12. 13. 黄永宪, 谢聿铭, 孟祥晨, 刘雁超, 马潇天, 万龙. 一种金属棒材表层纳米化的模具及其使用方法. ZL202010067171.1, 申请2020.01.20, 授权2021.07.20. 14. 黄永宪, 谢聿铭, 王非凡, 孟祥晨, 李峻臣, 万龙. 一种形变驱动固相挤压装置及用该装置一步法制备合金棒材的方法. ZL202010067163.7, 申请2020.01.20, 授权2021.12.28. 15. 黄永宪, 谢聿铭, 孟祥晨, 王梓鑫, 万龙. 一种电磁感应辅助加热搅拌头及应用其制备聚醚醚酮复合材料的方法, ZL202010067169.4, 申请2020.01.20, 授权2022.02.01. 16. 黄永宪, 谢聿铭, 孟祥晨. 一种连续进给送料搅拌摩擦增材制造装置及增材制造方法. ZL202110411108.X, 申请2021.04.16, 授权2022.04.22. 17. 黄永宪, 谢聿铭, 于江祥, 孟祥晨. 一种带有旋向限位的自填充摩擦铆焊装置及铆焊方法. ZL202110905475.5, 申请2021.08.06, 授权2022.06.17. 18. 黄永宪, 谢聿铭, 孟祥晨, 陈磊. 一种基于数值模拟和深度学习的搅拌摩擦焊缝成形预测的工艺参数、焊具结构优化方法. ZL201910238706.4, 申请2019.03.27, 授权2022.10.18. 19. 黄永宪, 谢聿铭, 孟祥晨, 万龙, 马潇天.一种浸润式电沉积焊装置及方法. ZL202210534351.5, 申请2023.06.30, 授权2023.06.30. 20. 黄永宪, 孟祥晨, 李峻臣, 谢聿铭, 王丽娟. 一种原位增大孔壁厚的双层同步摩擦拉拔方法. ZL201910221957.1, 申请2019.03.22, 授权2020.05.12. 21. 孟祥晨, 黄永宪, 谢聿铭, 李峻臣, 王丽娟. 一种抑制焊缝减薄并增厚焊缝的搅拌摩擦焊方法. ZL201910212166.2, 申请2019.03.20, 授权2021.01.05. 22. 黄永宪, 孟祥晨, 谢聿铭, 李峻臣. 一种通过磁力实现背部随动支撑的搅拌摩擦焊接方法. ZL201910221940.6, 申请2019.03.22, 授权2021.03.12. 23. 黄永宪, 孟祥晨, 谢聿铭, 李峻臣. 一种适用于金属与聚合物之间的搅拌摩擦焊接方法. ZL201910225037.7, 申请2019.03.22, 授权2021.03.12. 24. 黄永宪, 邹明达, 孟祥晨, 谢聿铭. 一种组分可调同步送料的摩擦头及摩擦增材制造方法. ZL201910550014.3, 申请2019.06.24, 授权2021.03.12. 25. 孟祥晨, 黄永宪, 谢聿铭, 李峻臣. 一种金属与热塑性复合材料铆焊一体式摩擦点焊方法. ZL201910212149.9, 申请2019.03.20, 授权2021.09.07. 26. 孟祥晨, 黄永宪, 于江祥, 谢聿铭. 一种双重连接模式的摩擦铆焊装置及铆焊方法. ZL202110905746.7, 申请2021.08.06, 授权2022.07.05. 27. 黄永宪, 秦志伟, 单承, 许双明, 谢聿铭, 孟祥晨, 万龙. 一种旋压法回收再利用石榴石型固态电解质的方法. ZL202210888102.6, 申请2022.07.27, 授权2023.04.18. 28. 黄永宪，孙秀文，谢聿铭，孟祥晨，王劲棋. 一种固相增材实现自修复的浮动式搅拌摩擦焊接装置及方法. ZL202211407519.2, 申请2022.11.11, 授权2023.06.23. 29. 黄永宪, 单承, 秦志伟, 许双明, 谢聿铭, 孟祥晨, 万龙. 一种无阳极锂离子电池铜基集流体的制备方法. ZL202210953532.1, 申请2022.08.10, 授权2023.06.26. 30. 黄永宪, 臧然卓荦, 徐瑞, 许双明, 孟祥晨, 谢聿铭, 万龙. 一种连续焊接的两步式无匙孔搅拌摩擦点焊装置及方法. ZL202210829824.4, 申请2022.07.14, 授权2023.07.04. 31. 黄永宪, 陈会子, 谢聿铭, 孟祥晨, 陈佳霖, 王劲棋, 孙秀文. 一种搅拌摩擦增材填充式对焊连接的装置及方法. ZL202211346495.4, 申请2022.10.31, 授权2023.08.01. 32. 黄永宪, 张泽宇, 孟祥晨, 谢聿铭, 冒冬鑫, 杨惠越. 一种随动锤击式搅拌摩擦增材制造装置及方法. ZL202211375795.5, 申请2022.11.04, 授权2023.09.05. 33. 黄永宪, 冒冬鑫, 孟祥晨, 谢聿铭, 张泽宇, 孙秀文, 王劲棋. 一种增材式填丝自调节搅拌摩擦焊的装置及其方法. ZL202211375806.X, 申请2022.11.04, 授权2024.02.02. 34. 孟祥晨, 孙书明, 梁明阳, 彭小洋, 韩世伟, 谢聿铭, 黄永宪. 一种同步控形控性处理的约束式摩擦螺柱焊接装置与方法. ZL202211459872.5, 申请2022.11.26, 授权2023.08.18. 35. 孟祥晨, 孙书明, 黄永宪, 谢聿铭, 袁靖宇. 一种固相增材制造制备异质金属焊接过渡接头装置及方法. ZL202211369828.X, 申请2022.11.03, 授权2023.09.05. 36. 万龙, 黄体方, 吕宗亮, 王继超, 谢聿铭, 李旭, 黄永宪. 摩擦形变触发自蔓延辅助铝/钢搅拌摩擦搭接方法. ZL201610473297.2, 申请2016.06.24, 授权2017.12.26. 37. 万龙, 李旭, 吕宗亮, 黄体方, 谢聿铭, 黄永宪. 组合型触发式搅拌摩擦塞钎焊补焊方法及其焊具. ZL201610473160.7, 申请2016.06.24, 授权2018.03.27. 38. 万龙, 王耀彬, 刘铁铮, 黄体方, 谢聿铭, 吕宗亮, 黄永宪. 一种钎料辅助测量搅拌摩擦焊过程中焊核区温度的方法. ZL201610473159.4, 申请2016.06.24, 授权2018.07.03. 39. 万龙, 谢聿铭, 吕宗亮, 黄体方, 刘鑫, 树西. 医用热针低压辅助式钎焊装置及方法. ZL201711273098.8, 申请2017.12.06, 授权2019.11.08. 申请发明专利 名称 1. 谢聿铭, 黄永宪, 孟祥晨, 万龙. 一种热塑性聚合物复合材料的孔壁补偿摩擦钻方法. CN202210628797.4, 申请2022.06.06. 2. 谢聿铭, 董嘉宁 ,黄永宪 ,孟祥晨, 孙秀文, 赵耀邦, 李峻臣, 马潇天. 一种强制液冷防积屑的搅拌摩擦增材制造装置及方法. CN202311142421.3, 申请2023.09.06. 3. 谢聿铭, 孙秀文, 黄永宪, 孟祥晨, 李峻臣, 赵耀邦, 马潇天, 董嘉宁. 一种钢铝异种金属增材式搅拌摩擦铆焊装置及方法. CN202311142009.1, 申请2023.09.06. 4. Yongxian Huang, Yuming Xie, Xiangchen Meng, Feifan Wang, Junchen Li, Long Wan. Deformation-Driven Solid-Phase Extrusion Device and One-Step Alloy Bar Preparation Method by Using Same. US17/407,543, 申请2021.08.20. 5. 黄永宪, 谢聿铭, 孟祥晨, 万龙, 马潇天. 一种双喷式电沉积焊装置及方法. CN202210534240.4, 申请2022.05.18. 6. 黄永宪, 陈会子, 谢聿铭, 陈佳霖, 孟祥晨, 阚磊, 王信, 彭小洋, 梁明阳, 韩世伟. 一种成分可控搅拌摩擦挤压制备合金丝棒材的方法及装置. CN202210432490.7, 申请2022.04.23. 7. 黄永宪, 冒冬鑫, 孟祥晨, 谢聿铭, 陈思浩, 刘立安, 赵耀邦, 万龙, 许双明. 一种随动预定位搅拌摩擦增材制造装置及其制造方法. CN202210562069.8, 申请2022.05.23 8. Yongxian Huang, Xiangchen Meng, Mingda Zou, Yuming Xie. Friction Head and Friction Additive Manufacturing Method of Adjusting Components and Synchronously Feeding Material. US17/406,571, 申请2021.08.19. 9. 黄永宪, 陈会子, 孟祥晨, 陈佳霖, 谢聿铭, 阚磊, 王信, 彭小洋, 梁明阳, 韩世伟. 一种同步不间断送丝全固相搅拌摩擦增材制造方法与装置. CN202210432498.3, 申请2022.04.23. 10. 黄永宪，陈佳霖，王艺霏，陈会子，谢聿铭，孟祥晨. 一种多丝循环梯度搅拌摩擦增材制造的方法及装置. CN202211384977.9, 申请2022.11.07. 11. 黄永宪，王劲棋，孟祥晨，谢聿铭，孙秀文. 基于高熵合金增强轻质合金搅拌摩擦增材制造的焊接装置及方法. CN202211423299.2, 申请2022.11.15. 12. 黄永宪, 王伟, 谢聿铭, 孟祥晨, 李峻臣, 陈思浩, 赵耀邦. 一种搅拌摩擦增材制造成形工具清理装置及方法. CN202310871523.2, 申请2023.07.17. 13. 黄永宪, 张泽宇, 孟祥晨, 谢聿铭, 冒冬鑫, 马潇天. 热丝冷体机器人搅拌摩擦增材制造装置及方法. CN202310872665.0, 申请2023.07.17. 14. 黄永宪, 王艺霏, 谢聿铭, 孟祥晨, 刘恒良, 秦志伟, 马潇天. 一种电弧熔丝辅助搅拌摩擦增材制造装置及方法. CN202310886064.5, 申请2023.07.19. 15. 孟祥晨, 孙书明, 谢聿铭, 黄永宪, 王祎然, 袁靖宇. 一种搅拌摩擦焊接装置及角焊缝焊接方法. CN202211529878.5, 申请2022.11.30. 16. 孟祥晨, 王伟, 董汶江, 谢聿铭, 黄永宪. 智能控温组织精准调控的搅拌摩擦增材制造装置及方法. CN202310975872.9, 申请2023.08.04. 17. 孟祥晨, 王伟, 董汶江, 马潇天, 谢聿铭, 黄永宪. 一种搅拌摩擦焊接同步多重改性提升接头耐腐蚀性能的装置及方法. CN202311436184.1，申请2023.10.31. 18. 黄永宪, 冒冬鑫, 孟祥晨, 谢聿铭, 张泽宇, 王伟. 一种机器人形变驱动固相增材制造方法、装置及复合装甲. CN202310336009.9, 申请2023.03.31. 19. 周华, 贾南, 陆亚轩, 吴涛, 高亦寒, 陈学松, 伦新凯, 孙书明, 孟祥晨, 谢聿铭, 黄永宪. 实现结晶器铜板表面强化的搅拌摩擦改性处理工具与方法. CN202310513663.2, 申请2023.05.09. 20. 贾南, 陆亚轩, 周华, 鄂涛, 张旭, 李会亚, 阚银辉, 孙书明, 孟祥晨, 谢聿铭, 黄永宪. 一种基于搅拌摩擦修复的铜及铜合金裂纹修复方法. CN202310513018.0, 申请2023.05.09. 软件著作权 名称 1. 谢聿铭, 孙秀文, 黄永宪, 孟祥晨, 董嘉宁, 马潇天. 搅拌摩擦增材制造动态再结晶仿真程序V1.0. 2023SR1666600. 2. 谢聿铭, 孙秀文, 黄永宪, 孟祥晨, 董嘉宁, 马潇天. 搅拌摩擦焊接与增材制造通用高应变速率材料本构程序V1.0. 2023SR1674269. 3. 谢聿铭, 董嘉宁, 黄永宪, 孟祥晨, 孙秀文, 马潇天. 电化学腐蚀塔菲尔曲线特征提取软件V1.0. 2024SR0035794. 4. 谢聿铭, 董嘉宁, 黄永宪, 孟祥晨, 孙秀文, 马潇天. 电化学腐蚀阻抗谱特征参数拟合软件V1.0. 2024SR0034728. 5. 黄永宪, 谢聿铭, 孟祥晨, 王非凡, 刘德博, 宋保永. 搅拌摩擦焊热机耦合晶体塑性本构方程生成软件V1.0. 2022SR0262536. 6. 黄永宪, 谢聿铭, 孟祥晨, 王非凡, 刘德博, 宋保永. 搅拌摩擦焊焊缝组织与性能预测计算软件V1.0. 2022SR0262537. 7. 黄永宪, 冒冬鑫, 谢聿铭, 孟祥晨, 张泽宇, 马潇天. 搅拌摩擦诱导大塑性变形合金性能预测计算软件V1.0. 2023SR1728642. 8. 马潇天, 黄永宪, 王乃婕, 谢聿铭, 孟祥晨, 冒冬鑫. 搅拌摩擦焊焊缝强化机制耦合计算软件V1.0. 2023SR1735196.