李磊科研成果

综合介绍 General Introduction 李磊，1983年生，河南新乡人，工学博士，西北工业大学教授、博士生导师、研究生院副院长。入选国家级青年人才，获批陕西省杰出青年科学基金。现为国防科工局某动力领域专家，XX装备修理系统安全管理专家委员会委员、先进船舶发动机技术全国重点实验室学术委员会委员，中国航发商发联合创新中心主任，中国机械工程学会增材制造技术分会青年委员，《应用力学学报》《热能动力工程》《Additive Manufacturing Frontiers (AMF)》青年编委，《内燃机学报》《粉末冶金材料科学与工程》特邀编委等。曾获2022“强国青年科学家”（全国仅10人）、陕西省航空学会青年科技奖（每届10人），曾任XXX-X工程项目“两总”系统主任设计师。入选西北工业大学翱翔新星、翱翔青年学者，获西北工业大学优秀青年教师特等奖（每年5人）、本科生最满意教师、“十育人”先进个人等。先后主持国家自然科学基金4项、XXX-X工程项目1项（解决“卡脖子”问题的重大项目，千万级）、XXX-X工程项目专题1项、“两机”专项基础研究专题4项、国防科工局MXXX计划专题3项、其他国防基础研究项目专题3项、省部级项目10项、型号攻关项目20余项等。参与编制国家标准2项，累积出版专著4部（第一作者2部），发表Int J Plasticity、AIAA J、Energy、Int J Heat Mass Tran、Int J Fatigue、Int J Mech Sci、Struct Multidisc Optim、Tribol Int、Appl Therm Eng、Int J Therm Sci、Mech Mater、航空学报、机械工程学报、航空动力学报、推进技术等论文152篇，授权技术发明专利23项。获国家科技进步二等奖1项、国防科技进步一等奖1项、中国造船工程学会科技进步一等奖1项、其他省部级奖3项。 个人相册 内容来自集群智慧云企服 实用新型专利1875代写全部资料全国受理

教育教学

个人经历 personal experience 工作经历 2001.09-2005.07，西北工业大学，工程力学，学士2005.09-2010.01，西北工业大学，力学，博士2010.04-2012.04，西北工业大学，航空宇航科学与技术博士后流动站，博士后2010.12-2011.07，中国航发商发涡轮部，联合工程队专家2012.04-2012.04，德国Duisburg-Essen大学，访问学者2012.04-2020.07，西北工业大学，讲师、副教授（破格）2014.12-2015.12，西北工业大学力学与土木建筑学院，院长助理2014.12-2015.12，工业和信息化部，装备工业二司航空处，项目主管2013.06-至今，西北工业大学，硕士生导师、博士生导师2016.01-2023.1，西北工业大学力学与土木建筑学院，副院长2020.07-至今，西北工业大学力学与土木建筑学院，教授2024.01-至今，西北工业大学研究生院，副院长 内容来自集群智慧云企服 请访问正版网址 www.jiqunzhihui.net

荣誉获奖

教育教学 Education and teaching 招生信息 招生领域：（1）结构设计与多学科优化；（2）热端部件损伤失效分析与强度寿命评估；（3）结构可靠性分析与设计；（4）先进材料力学行为。基本要求：本科专业包括力学、三航、机械、材料等；具有踏实肯干的精神，有团队协作能力。 内容来自集群智慧云企服 请访问正版网址 www.jiqunzhihui.net

科学研究

获奖信息 The winning information 国家级青年人才（2022年）2022“强国青年科学家”（全国仅10人）陕西省杰出青年科学基金（2022年）陕西省航空学会青年科技奖（每届10人，2023年）国家科技进步二等奖（排三，2019年）国防科技进步一等奖（排三，2022年）中国造船工程学会科技进步一等奖（排四，2023年）国防科技进步二等奖（排二，2017年）河南省科技进步奖三等奖（排三，2018年）英国Emerald出版集团Highly Commended Award（2019年）西北工业大学“翱翔青年学者”（2021年）西北工业大学“翱翔新星”（2019年）西北工业大学优秀青年教师（吴亚军奖）特等奖（每年5人，2021年）西北工业大学“十育人”先进个人（2022年）西北工业大学本科最满意教师（2021-2022学年） 内容来自集群智慧云企服 请访问正版网址 www.jiqunzhihui.net

学术成果

学术成果 Academic Achievements 代表性专著：李磊，杨子龙，王佩艳，岳珠峰等，燃气轮机涡轮冷却叶片设计及优化，科学出版社，2018李磊，李元生，敖良波，李立州等，船用大功率柴油机涡轮增压器多学科设计优化，科学出版社，2011岳珠峰，李立州，虞跨海，李磊等, 航空发动机涡轮叶片多学科设计优化, 科学出版社，2007代表性论文：Zhao Zhenan, Weizhu Yang, Lei Li*, Shouyi Sun, Yan Zeng, Shaoxing Qu*. Synchronously Enhanced strength-ductility of L-DEDed GH4169 with Varying Energy Input. International Journal of Mechanical Sciences, 2023, 253: 108402.Lei Li, Yan Zeng, Jie Li, Yanchao Zhao, Tianyu Yuan, Zhufeng Yue*. Effect of Crystal Orientation on Elastic Stresses and Vibration Characteristics of Nickel-based Single Crystal Turbine Blade. Materials Today Communications, 2023, 106135.Hongli Li, Zhenyuan Zhang, Lei Li*, Nannan Xiao, Heyue Shi, Chunlong Tan. State variable and optimization potential-based multi-objective optimization method and application in compressor blade airfoil design. Structural and Multidisciplinary Optimization, 2023, 66: 165.Tianyu Yuan, Min Dou, Lu Liu, Lei Li*, Shouyi Sun*, Chuanyun Hu. Improving high temperature fretting fatigue performance of nickel-based single crystal superalloy by shot peening. International Journal of Fatigue, 2023, 171:107563. (SCI, EI)Xiaoyu Huang, Pan Wang*, Huanhuan Hu, Haihe Li, Lei Li*. A novel safety measure with random and fuzzy variables and its solution by combining Kriging with truncated candidate region. Aerospace Science and Technology, 2023, 132: 108049.(SCI, EI)Zhenan Zhao, Weizhu Yang, Lei Li*, Shouyi Sun, Yan Zeng, ZhufengYue. Improved high-temperature fatigue performance of laser additive manufactured Ni-based superalloy by regulating the heat-treatment. International Journal of Fatigue, 2023, 169:107463. (SCI, EI)Haihe Li, Pan Wang*, Huanhuan Hu, Zhuo Su, Lei Li*, Zhufeng Yue.Data-driven reliability assessment with scarce samples considering multidimensional dependence. Probabilistic Engineering Mechanics, 2023, 72: 103440.Zhenan Zhao, Lei Li*, et al. A Comprehensive Study of the Anisotropic Tensile Properties of Laser Additive Manufactured Ni-based Superalloy after Heat Treatment. International Journal of Plasticity, 2022, 148: 103147. (SCI, EI)Yan Zeng, Lei Li*, Wei Huang, Zhenan Zhao, Weizhu Yang*, Zhufeng Yue. Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties. International Journal of Mechanical Sciences, 2022, 221:107173. (SCI, EI)Zheng Zhang, Pan Wang*, Huanhuan Hu, Lei Li*, Haihe Li, Zhufeng Yue. Efficient reliability-based design optimization for hydraulic pipeline with adaptive sampling region. Reliability Engineering & System Safety, 2022, 226: 108698. (SCI, EI)Tan, C., Gao, H., Li, L*. et al. Turbine blade arc tenon/mortise structure and optimization method based on parameterized mesh deformation. Structural and Multidisciplinary Optimization, 2022 65: 239. (SCI, EI)Weizhu Yang*, Sichen Dong, Xidian Zhu, Shuoshuo Ren, Lei Li*. Superior energy absorption performance of layered aux-hex honeycomb filled tubes. International Journal of Mechanical Sciences, 2022, 234: 107702. (SCI, EI)Sun, S., Li, L.*, Hu, C. et al. Tribological Behavior of a Shot-Peened Nickel-Based Single Crystal Superalloy at High Temperature. Tribology Letters , 2022, 70: 100. (SCI, EI)Wenjing GAO, Lei LI *, Honglin LI, Zhenan ZHAO, Zhufeng YUE. Numerical simulation of broken pin effects on the flow field and cooling performance of a double-wall cooling configuration. Chinese Journal of Aeronautics, 2021, 34(2): 358-375. (SCI, EI)Shouyi Sun, Lei Li*, et al. Experimental and numerical investigation on fretting fatigue behavior of Nickel-based single crystal superalloy at high temperature. Mechanics of Materials, 2020. (SCI, EI)Shouyi Sun, Lei Li*, Kun He, Zhufeng Yue, Weizhu Yang, Zhiyuan Yu. Fretting fatigue damage mechanism of Nickel-based single crystal superalloys at high temperature. International Journal of Mechanical Sciences, 2020, 105894. (SCI, EI)Lei Li*, Zhonghao Tang, Honglin Li, et al. Convective heat transfer characteristics of twin-web turbine disk with pin fins in the inner cavity. International Journal of Thermal Sciences, 2020, 152: 106303. (SCI, EI)Tong Fujuan, Gou Wenxuan, Zhao Zhenan, Gao Wenjing, Li Honglin, Li Lei*. Numerical investigation of impingement heat transfer on smooth and roughened surfaces in a high-pressure turbine inner casing. International Journal of Thermal Sciences, 2020, 149: 106186. (SCI, EI)Sun, S., Li L.*, et al., Fretting fatigue failure behavior of nickel-based single crystal superalloys dovetail specimen in contact with powder metallurgy pads at high temperature, Tribology International, 2020, 142: 105986. (SCI, EI)Li Lei*, et al., High temperature friction and wear features of nickel-based single crystal superalloy. Tribology Letters, 2020, 68: 21. (SCI, EI)Li, L.*, et al., Aerodynamic shape optimization of a single turbine stage based on parameterized Free-Form Deformation with mapping design parameters. Energy, 2019, 169: 444-455. (SCI, EI)Li, L.*, et al., Reliability based multidisciplinary design optimization of cooling turbine blade considering uncertainty data statistics. Structural and Multidisciplinary Optimization, 2019, 59(2): 659-673. (SCI, EI)Lei Li*, Tianyu Yuan, Yuan Li, et al. Multidisciplinary Design Optimization Based on Parameterized Free-Form Deformation for Single Turbine. AIAA Jounal, 2019, 57(5): 2075-673. (SCI, EI)Lei Li*, et al. Multidisciplinary design optimization of twin-web turbine disk with pin fins in inner cavity. Applied Thermal Engineering, 2019, 161: 114104. (SCI, EI)Sun, S., Li L.*, et al., RA-based fretting fatigue life prediction method of Ni-based single crystal superalloys. Tribology International, 2019, 134: 109-117. (SCI, EI)Gao, W.J., Li L*, et al. Research on the Influence of Guide Blade Trailing Edge Structure on Turbine Performance. Journal of Thermal Science, 2019, 28(3): 472–483. (SCI, EI)Sun Shouyi, Yue Zhufeng, Li Lei*, et al. Preliminary design of centrifugal compressor using multidisciplinary optimization method. Mechanics & Industry, 2019, 20(6): 628. (SCI, EI)Zhang, M., Li L*, et al., Multidisciplinary design and multi-objective optimization on guide fins of twin-web disk using Kriging surrogate model. Structural and Multidisciplinary Optimization, 2017. 55(1): 1-13.(SCI, EI)Gao, W.J., Li L*, et al., Numerical simulation on film cooling with compound angle of blade leading edge model for gas turbine. International Journal of Heat and Mass Transfer, 2017. 115: 839-855.(SCI, EI)Zhao Z, Hu W, Li L*, et al. Strength variation of gas cooling turbine blade pin-fin with different array. Materialwissenschaft Und Werkstofftechnik, 2015, 46(1):78–89. (SCI, EI)Zhang M, Gou W, Li L*, et al. Multidisciplinary design and optimization of the twin-web turbine disk. Structural and Multidisciplinary Optimization, 2015:1-13. (SCI, EI)Lei Li*, Xinmei Wang, Liangbo Ao, Qitao Zhou, Zhufeng Yue. Investigation on crystallographic behaviors of nickel-base single crystal alloy cooling holes with different spanwise injection angles. Materialwissenschaft Und Werkstofftechnik, 45(1): 21-25, 2014. (SCI, EI)李磊*, 李缘, 杨子龙, 苑天宇, 杨未柱, 陈太宇. 基于寿命与可靠性的离心叶轮多学科设计优化. 哈尔滨工程大学学报, 2020. (EI)李磊*, 李宏林, 杨子龙, 孙守义, 杨未柱, 康家磊. 基于网格参数化变形的单级涡轮多学科可靠性设计优化. 航空动力学报,2019,34(08):1764-1772.  (EI)陈霞, 李磊*, 岳珠峰,等. Kriging代理模型下基于垂距的多点取样算法. 机械工程学报, 2015(9):153-158. (EI)李磊*, 侯乃先, 等. 不同孔间距下镍基单晶气膜孔的弹塑性研究. 稀有金属材料与工程, 2013, 42(3):519-523 (SCI, EI)李磊*, 李立州, 等. 基于曲率优化的参数平面叶栅设计方法. 推进技术, 2013,34(1):35-39. (EI)李磊*，李元生，敖良波等. 基于z-θ流面径流式叶片中弧线造型方法. 机械工程学报, 2012, 48(5):187-192. (EI)李磊*，敖良波，李元生等. 离心式压气机耦合松弛多学科设计优化方法研究. 推进技术, 2011,32(1): 42-46. (EI)李磊*，敖良波，李元生等. 船用高压比大流量增压器涡轮多学科设计优化. 兵工学报, 2010,31(5):574-579. (EI)李磊*，李元生，敖良波等. 离心式压气机流-热-固耦合分析. 推进技术, 2009, 30(4):425-429. (EI)李磊，秦卫阳*，张劲夫. 采用BP神经网络进行混沌运动控制. 振动与冲击, 2006, 25(5):89-91. (EI)

内容来自集群智慧云企服 软件产品登记测试全国受理

综合介绍

内容来自集群智慧云企服 发明专利4999元代写全部资料全国受理