张秋明

基本信息 科学研究 教育教学 论文专著 新建主栏目 基本信息 名称 张秋明，男，汉族，1969年生。高级工程师职称；哈尔滨工业大学化工学院化学工艺系。1 荣誉称号 名称 无 工作经历 名称 时间 工作经历 1991-2002 哈尔滨化工热电厂 2009- 哈工大化工学院 教育经历 名称 1988年-1991年, 就读于南京化工动力专科学校，热能工程系； 2002-2004年，于哈工大复合材料研究所攻读硕士学位，材料学专业； 2005-2009年，于哈工大复合材料研究所攻读博士学位，材料学专业。 主要任职 名称 化学工艺系工程师 研究领域 名称 高温合金蜂窝夹心结构 热障涂层以及盐雾腐蚀 复合材料结构 主要研究方向:高温合金的高温腐蚀和复合材料舱段的设计和优化 团队成员 名称 无 讲授课程 名称 化学工艺进展专题之一：热障涂层的研究现状和发展趋势 化工综合实验之二：洞道干燥和多釜串联 招生信息 名称 无 论文期刊 论文标题 Microstructure evolution and mechanical properties of a nickel-basedhoneycomb sandwich aged at 900 ？C 作者 Zhang Qiuming, He Xiaodong, Li Yao 发表时间 期刊名称 Materials Science and Engineering A 期卷 530 简单介绍 A nickel-based superalloy honeycomb sandwich was manufactured by high-temperature brazing. Themicrostructure evolution and the out-of-plate mechanical properties were determined for honeycombsandwiches aged at 900 ？C. The maximum tensile stress was 28.5MPa and the compressive yield strengthwas 29.6MPa for the original specimens. These parameters decreased to 22.2MPa and 18.8MPa for specimensaged for 10 h, to 19.3MPa and15.5MPa for specimens aged for 20 h and to 20.3MPa and 16.5MPafor specimens aged for 30 h, respectively. There was not obvious yield process in all curves of tensile stressversus strain. With increasing aging time, the tensile elongation decreased, and the intermetallic compoundsand the eutectic structure in the brazing region disappeared, and the solid solution approachingthe matrix gradually increased. 论文标题 Microstructural evolution and mechanical properties of anickel-based honeycomb sandwich 作者 Qiuming Zhang, Xiaodong He 发表时间 期刊名称 M A T E R I A L S C H A R A C T E R I Z A T I O N 期卷 60 简单介绍 A nickel-based superalloy honeycomb sandwich was manufactured by high-temperaturebrazing. The microstructural evolution and the out-of-plate mechanical properties weredetermined for honeycomb sandwiches aged at 800 °C. The maximum tensile strength was28.5 MPa and the compressive yield strength was 29.6 MPa for the original specimens. Theseparameters decreased to 24.7 MPa and 23.5 MPa for specimens aged for 10 h, to 24.9 MPa and21.5 MPa for specimens aged for 20 h and to 26 MPa and 24.8 MPa for specimens aged for 30 h,respectively. With increased aging time the tensile elongation decreased, the intermetalliccompounds and the eutectic structure in the brazing region disappeared, and the solidsolution approaching the matrix gradually increased.