发布日期:2024-05-10 浏览次数:次
基本信息 科学研究 论文专著 人才培养 招生信息 教育教学 团队成员 活动相册 ... 教育教学 团队成员 活动相册 新建主栏目 基本信息 名称 陈明君,工学博士,机电工程学院教授、博士生导师,研究方向为超精密加工与微纳制造技术。 入选国家高层次人才计划、教育部高层次人才计划、科技部高层次人才推进计划、教育部新世纪人才支持计划、黑龙江省高校青年学术骨干支持计划,获黑龙江省第七届青年科技奖,是黑龙江省“超精密加工与微纳制造创新研究团队”“头雁”计划负责人。 主持国家自然科学基金项目(5项)、科技部NC重大专项(1项)、科技部重点研发计划项目(2项)、科技部“863计划”重点项目(2项)、其他国家及省部级项目(30余项)等主要科研项目40余项。近年来,获部/省级自然科学一等奖2项、二等奖2项,科技进步三等奖1项;申请国家发明专利100余项,已授权60余项;主参编教材5部;在高水平杂志及会议上发表科研论文200余篇,其中SCI检索100余篇,EI检索150余篇,被国内外文献他引4000余次。 荣誉奖励 名称 2022.12,“大口径高功率激光元件表面微缺陷精密检测与修复装备及相关技术”获教育部技术发明一等奖(第一完成人); 2022.10. 黑龙江省第一届专利奖银奖(第一完成人); 2019.11,入选教育部高层次人才计划(2018年度); 2019.08,负责的“超精密加工与微纳制造创新研究团队”入选黑龙江省“头雁”计划; 2018.01,入选国家高层次人才计划; 2016.12,入选“科技部高层次人才推进计划”(创新人才推进计划)”; 2013.11,“难加工材料塑性域加工机理与应用基础研究”获黑龙江自然科学二等奖(第一完成人); 2013.09,获黑龙江省高校师德先进个人荣誉称号; 2009.09,“纳米机械加工过程建模、仿真理论基础及其力学行为表征”获黑龙江省自然科学一等奖(第 一完成人); 2007.01,“微纳米切削加工基础及相关技术”获教育部自然科学一等奖(第三完成人); 2006.11,入选“教育部新世纪人才支持计划”; 2006.02,获黑龙江省第七届青年科学技术奖; 2006.01,入选黑龙江省高等学校骨干教师支持计划; 2005.07,“超精密与纳米加工理论及相关技术研究”获黑龙江自然科学二等奖(第四完成人); 2003.09,“精密非球曲面磨削应用技术研究”获科学技术进步三等奖(第二完成人)。 工作经历 名称 2006-至 今 哈尔滨工业大学/机电工程学院,博导 2005-至 今 哈尔滨工业大学/机电工程学院,教授 2001-2005年 哈尔滨工业大学/机电工程学院,副教授 1999-2001年 哈尔滨工业大学/机电工程学院,讲师 1997-1999年 哈尔滨工业大学/机电工程学院,助教 教育经历 名称 1997-2001年 哈尔滨工业大学 博士 1993-1996年 哈尔滨工业大学 硕士 1989-1993年 哈尔滨工业大学 学士 学术兼职 名称 全国高校制造技术与机床研究会常务理事、东北分会副理事长兼秘书长; 光学超精密加工重点实验室学术委员会委员; 天津市装备设计与制造技术重点实验室学术委员会委员; 宁波市光学超精密加工学术委员会委员; 哈工大与七O七所谐振陀螺联合实验室副主任; 国家科技奖励评审专家; 教育部科技奖励评审专家; 《International Journal of Machining and Machinability of Materials》国际杂志编委; 《American Journal of Engineering and Applied Science》国际杂志编委; 《Chinese Journal of Engineering》国际杂志编委; 《Nanotechnology and Precision Engineering》国际杂志编委; 《强激光与离子束》杂志编委; 《中国机械工程》杂志编委; 中国机械工程学会成组与智能集成技术分会与生产工程分会常务理事; 中国机械工程学微纳制造技术分会理事; 中国机械工程学极端制造技术分会常务理事; 中国机械工程学超精密与微纳米制造技术分会委员; 黑龙江省生物医学工程学会理事; 欧洲精密工程与纳米技术学会会员(EUSPEN Member); 亚洲精密工程与纳米技术学会会员(ASPEN Member); 国际光学工程学会会员(SPIE Member); 《Nano. Lett.》、《Biomaterials》、《ACS Appl.Mater. Inter.》、《Nanotechnology》、《J. Phys. Chem. B》、《J. Phys. Chem. C》、《Int. J. Mach. Tool. Manu.》、《Int. J. Adv. Manu. Tech.》、《Surf. Sci.》、《Measurement》、《Chinese Phys. B》、《Precis. Eng.》等40余种国际杂志审稿人。 新闻动态 新闻标题 祝贺课题组程健老师负责项目获评“国家自然科学基金机械工程学科2020年度优秀结题项目” 发布时间 2022-2-20 在2020年度结题较好的197项国家自然科学基金项目中,最终有10项被评选为“国家自然科学基金机械工程学科2020年优秀结题项目”,本课题组程健老师负责的项目成功入选。Link 新闻标题 祝贺课题组程健老师和于天宇老师晋升博士生导师 发布时间 2020-7-16 根据学校博士生导师遴选规定,经所在学科学位分委会和学院党委审核通过,课题组程健老师和于天宇老师符合备案条件,成功评选为博士生导师。Link 新闻标题 祝贺课题组李晓雷同学获得博士学位 发布时间 2020-7-6 陈明君教授课题组李晓雷同学于2020年6月15日通过博士学位论文答辩,7月6日,参加学校举行的博士学位授予仪式,正式获得博士学位。 新闻标题 祝贺课题组陈妮博士论文入选校优秀博士论文 发布时间 2019-7-12 经各学位分委员会初选及校学位委员会评议,共评选出我校第二十一届优秀博士学位论文28篇,本课题组毕业博士陈妮博士论文成功入选。Link 新闻标题 祝贺课题组刘赫男同学获得博士学位 发布时间 2019-7-12 陈明君教授课题组刘赫男同学于2019年6月5日通过博士学位论文答辩,7月12日,参加学校举行的博士学位授予仪式,正式获得博士学位。 新闻标题 陈明君教授牵头“超精密与微纳制造创新研究团队”入选黑龙江省“头雁”团队名单 发布时间 2019-7-4 据来自黑龙江省教育厅的消息,2019年7月3日,黑龙江省“头雁”行动领导小组办公室对《黑龙江省“头雁”团队拟入选名单》进行公示,陈明君教授负责的“超精密与微纳制造创新研究团队”成功入选。Link 新闻标题 课题组团队成员程健老师取得青年拔尖人才选聘计划副教授任职资格 发布时间 2019-5-15 经个人申请、院系考核推荐、国内外同行专家函评、校人力资源委员会常委扩大会议评审、校人力资源委员会审定、校长办公会审议通过,同意程健老师取得青年拔尖人才选聘计划副教授任职资格。 新闻标题 陈明君教授主持中船七〇七研究所与哈工大机电学院合作框架签约仪式 发布时间 2019-4-30 2019年4月26日,中国船舶重工集团公司第七〇七研究所所长赵坤研究员一行到哈尔滨工业大学机电工程学院进行调研,双方就光学元器件研制领域的科研合作和学生培养进行广泛研讨,成功举行了中国船舶重工集团公司第七〇七研究所与哈尔滨工业大学机电工程学院合作框架签约仪式,会议由机电工程学院机械制造及自动化系主任陈明君教授主持。Link 新闻标题 课题组程健老师入选第四届中国科协青年人才托举工程 发布时间 2018-12-24 根据《中国科协青年人才托举工程实施细则》规定,对第四届中国科协青年人才托举工程285名人选名单予以公示,陈明君教授课题组团队成员程健老师成功入选。Link 研究领域 名称 面向航空、航天、舰船、新能源等领域需求,重点针对软脆/硬脆材料超精加工去除机理、超光滑表面形成机制及性能表征、微纳制造技术及应用等方面开展研究工作。主要研究方向如下: 1. 精密超精密加工技术与工艺装备 (1)自由复杂曲面零件超精密加工工艺装备、数控系统编程、驱动控制与误差补偿技术研究(国家重点研发计划项目,“863计划”重点项目,其他省部级项目) (2)光学零件超精密加工工艺装备、加工监测图像拼接处理研究(“863计划”重点项目、能量攻关计划项目) (3)非线性光学材料超精密加工技术及表面完整性评价研究(国家自然基金项目3项、其他省部级项目) 2. 微纳米制造技术及其应用基础研究 (1)微纳加工机理、加工工艺装备、微小刀具制备技术与复杂微结构表面加工技术研究(国家自然科学基金重点项目,其他省部级项目) (2)生物材料表面微纳结构制造及其与生物组织、血液相容性的评价技术(教育部新世纪人才支持计划项目,国家自然基金青年基金项目) (3)超疏水微纳结构制造技术及其理论分析(基础科研计划项目) 3. 工艺自动化技术与装备 (1)高精度非接触式在线检测理论与装备研制(靶场系统验证项目) (2)大口径光学零件表面疵病点的微纳测量、在线监测与微修复工艺技术研究(国家NC重大专项、国家自然基金项目2项) (3)图像优化处理、信号分析系统、数控编程技术在制造加工设备中的应用(国家NC重大专项项目) 主要在研项目 项目名称 KDP功能晶体表层微米级缺陷的激光诱导损伤抑制机理及其全流程控制策略研究 项目来源 l国家自然基金重点项目 开始时间 2023 结束时间 2027 项目经费 269万 担任角色 负责 项目类别 纵向项目 项目状态 进行中 简单介绍 项目名称 惯性器件硬脆复杂结构高效精密加工技术 项目来源 国家重点研发计划项目 开始时间 2023 结束时间 2025 项目经费 1385万 担任角色 负责 项目类别 纵向项目 项目状态 进行中 简单介绍 项目名称 复杂异型曲面零件超精密加工与检测技术 项目来源 纵向项目 开始时间 2021 结束时间 2024 项目经费 2334万 担任角色 负责 项目类别 纵向项目 项目状态 进行中 简单介绍 项目名称 复杂微结构零件超精密加工技术与装备 项目来源 纵向项目 开始时间 2020 结束时间 2024 项目经费 657万 担任角色 负责 项目类别 纵向项目 项目状态 进行中 简单介绍 项目名称 光学元件修复机床研制 项目来源 横向项目 开始时间 2021 结束时间 2023 项目经费 480万 担任角色 负责 项目类别 横向项目 项目状态 进行中 简单介绍 项目名称 大型框架结构件清洗技术 项目来源 横向项目 开始时间 2021 结束时间 2024 项目经费 660万 担任角色 负责 项目类别 横向项目 项目状态 进行中 简单介绍 项目名称 熔石英表面微缺陷激光损伤机理与抑制技术 项目来源 纵向项目 开始时间 300万 结束时间 2019 项目经费 2023 担任角色 负责 项目类别 纵向项目 项目状态 进行中 简单介绍 项目名称 激光复合磁流变液精密磨抛加工工艺与装备 项目来源 国家重点研发计划 开始时间 2018.05 结束时间 2021.04 项目经费 315万 担任角色 负责 项目类别 纵向项目 项目状态 完成 简单介绍 项目名称 超精密磨抛加工装备研制 项目来源 企业合作课题 开始时间 2019.05 结束时间 2020.12 项目经费 495万 担任角色 负责 项目类别 横向项目 项目状态 完成 简单介绍 项目名称 高端硬质合金和金属陶瓷典型刀具工具共性技术研发 项目来源 科技部-重点研发计划项目 开始时间 2017.07 结束时间 2021.12 项目经费 286万 担任角色 负责 项目类别 项目状态 完成 简单介绍 项目名称 KDP晶体表面微缺陷修复的中高频误差抑制机理及其抗强激光损伤能力影响研究 项目来源 国家自然科学基金-面上项目 开始时间 2018.01 结束时间 2022.12 项目经费 67万 担任角色 负责 项目类别 纵向项目 项目状态 完成 简单介绍 项目名称 半球谐振子硬脆薄壁复杂结构件超精密加工技术与装备 项目来源 科技部-“863”计划重点项目 开始时间 2015.03 结束时间 2019.08 项目经费 480万 担任角色 项目类别 纵向项目 项目状态 完成 简单介绍 期刊论文 名称 在国内外高水平学术杂志上发表文章200余篇,其中SCI检索100余篇,EI检索150余篇,被国内外文献他引4000余次,部分论文整理如下: 2023 Wenyu Ding, Linjie Zhao, Mingjun Chen*, et al.“Determination of stress waves and their effect on the damage extension induced by surface defects of KDP crystals under intense laser irradiation.”Optica. 2023, 10(6): 671-681. (SCI, IF: 10.4/2022). Link Dinghuai Yang, Linjie Zhao, Jian Cheng*, Mingjun Chen*, et al.“Unveiling sub-bandgap energy-level structures on machined optical surfaces based on weak photo-luminescence.”Nanoscale. 2023. (SCI, IF: 6.7/2022). Link Jinchuan Tian, Henan Liu, Jian Cheng, Mingjun Chen*, et al.“A novel specialized material removal rate model considering the synergistic effect of dynamic pressure and shear stress for the permanent-magnet small ball-end magnetorheological polishing.”Journal of Manufacturing Processes. 2023, 101:1431-1442. (SCI, IF: 6.2/2022). Link Dinghuai Yang, Linjie Zhao, Mingjun Chen, et al.“A novel method to characterize the residual stress on the fused silica surface based on the evolution of the atomic point defects.”Applied Surface Science. 2023, 640: 158323. (SCI, IF: 6.7/2022). Link Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al.“Relationship between the photoluminescence envelope area of surface defects and the laser-induced damage thresholds of mechanically machined fused silica optical surfaces.”Ceramics International. 2023, 49(14): 22767-22781. (SCI, IF: 5.2/2022). Link Xingying Zhou, Henan Liu, Yianyu Yu, Ruiyang Guo, Guangzhou Wang, Yazhou Sun, Mingjun Chen*.“Experimental and modeling study of surface topography generation considering tool-workpiece vibration in high-precision turning.”Chinese Journal of Aeronautics. 2023, 36(7): 194-212. (SCI, IF: 5.7/2022). Link Jinchuan Tian, Mingjun Chen, et al. “A novel method of water bath heating assisted small ball-end magnetorheological polishing for hemispherical shell resonators.”Chinese Journal of Aeronautics. 2023. (SCI, IF: 5.7/2022). Link Biao Qin, Henan Liu, Jian Cheng, Jinchuan Tian, Jiangang Sun, Zihan Zhou, Chuanzhen Ma, Mingjun Chen*. “Hemispherical resonator with low subsurface damage machined by small ball-end fine diamond grinding wheel: A novel grinding technique.”Chinese Journal of Aeronautics. 2023. (SCI, IF: 5.7/2022). Link Yulong Gao, Mingyu Gao, Fei Wang, Junyan Liu, Feng Yang, Jie Sheng, Mingjun Chen, et al. “Convolution neural network fusion high power halogen lamp induced thermal-wave diffusion multidimensional features: An intelligent defect identification approach for aviation honeycomb sandwich composites.”Infrared Physics & Technology. 2023, 133: 104772. (SCI, IF: 3.3/2022). Link Qi Liu, Mingjun Chen*, et al.“Ultra-Precision Manufacturing Technology for Difficult-to-Machine Materials.”Materials. 2023, 16(12): 4322. (SCI, IF: 3.4/2022). Link Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al. “Mechanisms of the sharp decrease of the LIDT from the plastic surface defect to the brittle surface defect on optical surface.”Applied Surface Science. 2023, 629: 157394. (SCI, IF: 6.7/2022). Link Ruiyang Guo, Tianyu Yu, Mingjun Chen*.“Frictional behavior of tool-workpiece on surface quality of glow discharge polymer during micro-milling.”Wear. 2023, 522: 204707. (SCI, IF: 5.0/2022). Link Guotai Li, Tianyu Yu*, Pan Wu, Mingjun Chen.“Molecular dynamics simulation of phase transformation and wear behavior of Ni35Al30Co35 high temperature shape memory alloy.”Wear. 2023, 522: 204849. (SCI, IF: 5.0/2022). Link Xingying Zhou, Yianyu Yu, Guangzhou Wang, Ruiyang Guo, Yanxu Fu, Yazhou Sun, Mingjun Chen*.“Tool wear classification based on convolutional neural network and time series images during high precision turning of copper.”Wear. 2023, 522: 204692. (SCI, IF: 5.0/2022). Link Guangzhou Wang, Mingjun Chen*, Xingying Zhou.“Modelling and analysis of the micro-milling of micro-dimpled structures with copying method on glow discharge polymer (GDP).”Wear. 2023, 523: 204776. (SCI, IF: 5.0/2022). Link Pan Wu , Tianyu Yu*, Mingjun Chen.“Magnetically-assisted digital light processing 4D printing of flexible anisotropic soft-Magnetic composites.”Virtual and Physical Prototyping. 2023, 18:1. (SCI, IF: 10.6/2022). Link Pan Wu, Tianyu Yu*, Guotai Li, Mingjun Chen. “Magnetic field-assisted DLP of CIPs/resin composites: Mechanical properties, anisotropic magnetic performance and wear behavior.”Wear. 2023, 523: 204800. (SCI, IF: 5.0/2022). Link Zixuan Chen, Ye Tian, Jingguo Zhu, Laixi Sun, Fang Wang, Yizhang Ai, Hongjie Liu, Xuewei Deng, Mingjun Chen, et al. “Laser Damage Performance Study of Fundamental Frequency Dielectric Film Optical Elements.”Crystals. 2023, 13(4): 571. (SCI, IF: 2.7/2022). Link Zhaoyang Yin, Henan Liu, Linjie Zhao*, Jian Cheng, Chao Tan, Xiaotao Li, Yankang Chen, Zhiyu Lin, Mingjun Chen. “Efficient and precise detection for surface flaws on large-aperture optics based on machine vision and machine learning.”Optics & Laser Technology. 2023, 159: 109011. (SCI, IF: 5.0/2022). Link Tianyu Yu*, Xiaolong Zhu, Hongwei Yu, Pan Wu, Chun Li, Xiaoxiao Han, Mingjun Chen. “Material extrusion-based additive manufacturing of zirconia toughened alumina: Machinability, mechanical properties and biocompatibility.”Journal of Manufacturing Processes. 2023, 94: 120-132. (SCI, IF: 6.2/2022). Link Jiacheng Wei, Yu He, Fei Wang*, Yuyu He, Xiaoxu Rong, Mingjun Chen, et al. “Convolutional neural network assisted infrared imaging technology: An enhanced online processing state monitoring method for laser powder bed fusion.”Infrared Physics & Technology. 2023, 131: 104661. (SCI, IF: 3.3/2022). Link Qi Liu, Jian Cheng, Zhirong Liao, Mingyu Liu, Mingjun Chen*, et al. “Fractal Analysis on Machined Surface Morphologies of Soft-Brittle KDP Crystals Processed by Micro Ball-End Milling.”Materials. 2023, 16(5): 1782. (SCI, IF: 3.4/2022). Link Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al.“Evolution of the point defects involved under the action of mechanical forces on mechanically machined fused silica surfaces.”Optics Express. 2023, 31(5): 7684-7706. (SCI, IF: 3.8/2022). Link Xianglin Meng, Fei Wang*, Zhipeng Liang, Xuan Zhang, Jiexin Weng, Zhijie Li, Junyan Liu*, Mingjun Chen, et al. “Research on the detection of silica/phenolic composite surface cracks using instantaneous high-power xenon lamp-induced chirp-pulsed radar thermography.”Measurement. 2023, 209: 112494. (SCI, IF: 5.6/2022). Link Guotai Li, Tianyu Yu, Pan Wu, Mingjun Chen. “Molecular Dynamics Simulation of NiTi Shape Memory Alloys Produced by Laser Powder Bed Fusion: Laser Parameters on Phase Transformation Behavior.”Materials. 2023, 16(1): 409. (SCI, IF: 3.4/2022). Link Tianyu Yu*, Yuan Tian, Mingjun Chen. “A novel method to additively repair micro-damaged fused silica using localized CO2 laser.”Materials Letters. 2023, 349: 134901. (SCI, IF: 3.0/2022). Link 马传震,刘赫男,陈明君*,等. 半球谐振子关键性能及制造工艺研究新进展. 机械工程学报. 2023. Link 马传震,刘赫男,陈明君*,等. 半球谐振子几何参量对其热弹性阻尼影响研究. 机械工程学报. 2023. Link 2022 Jinchuan Tian, Mingjun Chen, Henan Liu, et al. “Study on mechanism of improving efficiency of permanent-magnet small ball-end magnetorheological polishing by increasing magnetorheological fluid temperature.” Scientific Reports. 2022, 12: 7705. (SCI, IF: 4.996/2021). Link Chao Tan, Linjie Zha, MingJun Chen, Jian Cheng, et al. “Repaired morphology of CO2 laser rapid ablation mitigation of fused silica and its influence on downstream light modulation.” Science China Technological Sciences. 2022, 65(5): 1116-1126. (SCI, IF: 3.903/2021). Link Chao Tan, Linjie Zhao, Mingjun Chen, Jian Cheng, et al. “Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation.” Optics & Laser Technology. 2022, 147: 107648. (SCI, IF: 4.939/2021). Link Chao Tan, Linjie Zhao, Mingjun Chen, Jian Cheng, et al. “Heat accumulation effect during CO2 laser processing of fused silica optics.” Results in Physics. 2022, 34: 105308. (SCI, IF: 4.565/2021). Link Jian Cheng*, Zican Yang, Chen Wang, Linjie Zhao, Mingjun Chen, et al. “Effect of scratches on the damage characteristics of fused silica optics under extremely-high impact load.” International Journal of Mechanical Sciences. 2022, 219: 107099. (SCI, IF: 6.772 /2021). Link Linjie Zhao, Zhaoyang Yin, Dezhi Zhang, Jian Cheng, Hao Yang, Chao Tan, Qi Liu, Mingjun Chen, and Xiaodong Yuan. “A Novel Subpixel Size Calibration Method for the Size Detection of Microtarget on Large-Aperture Optics Surface.” IEEE Transactions on Instrumentation and Measurement. 2022, 71: 5001810. (SCI, IF: 5.332/2021). Link Jinchuan Tian, Henan Liu, Jian Cheng, Mingjun Chen, et al.“Improving the small ball-end magnetorheological polishing efficiency of fused silica workpiece by the promoting effect of water-bath heating and sodium hydroxide addition on polishing velocity and chemical reaction.”The International Journal of Advanced Manufacturing Technology. 2022, 123(1-2): 645-656. (SCI, IF: 3.563/2021). Link Qi Liu, Jian Cheng, Zhirong Liao, Xichun Luo, Yue Yang, Mingquan Li, Hao Yang, Chao Tan, Guangzhou Wang, Wenyu Ding, Zhaoyang Yin, Linjie Zhao*, Mingjun Chen.“Research on the light intensity modulation and characterizing methods of surface texture on KDP optics generated in fly-cutting and micro ball-end milling processes.”CIRP Journal of Manufacturing Science and Technology. 2023, 41: 30-43. (SCI, IF: 4.8/2022). Link Zhaoyang Yin, Mingjun Chen, et al.“A novel automatic classification approach for micro-flaws on the large-aperture optics surface based on multi-light source fusion and integrated deep learning architecture.”Journal of Intelligent Manufacturing. 2022: 1-16. (SCI, IF: 7.136/2021). Link Xiguang Li, Chunya Wu*, Bo Hou, Jiahao Wu, Ruijiang Sun, Mingjun Chen. “Molecular investigation of interplay mechanism between polydopamine and graphene oxide: The effect of oxidation degree on the adsorption behavior of polydopamine.”Applied Surface Science. 2023, 611: 155759. (SCI, IF: 6.7/2022). Link Wenyu Ding, Mingjun Chen, et al. “Laser damage evolution by defects on diamond fly-cutting KDP surfaces.”International Journal of Mechanical Sciences. 2023, 237: 107794. (SCI, IF: 7.3/2022). Link Guangzhou Wang, Tianyu Yu, Xingying Zhou, Ruiyang Guo, Mingjun Chen*, Yazhou Sun. “Material removal mechanism and microstructure fabrication of GDP during micro-milling.”International Journal of Mechanical Sciences. 2023, 240: 107946. (SCI, IF: 7.3/2022). Link Pan Wu, Tianyu Yu, Mingjun Chen, et al. “Effect of printing speed and part geometry on the self-deformation behaviors of 4D printed shape memory PLA using FDM.”Journal of Manufacturing Processes. 2022, 84: 1507-1518. (SCI, IF: 5.684/2021). Link Hongqin Lei, Jian Cheng*, Dinghuai Yang, Linjie Zhao, Mingjun Chen, et al. “Effect of Pre-Existing Micro-Defects on Cutting Force and Machined Surface Quality Involved in the Ball-End Milling Repairing of Flawed KDP Crystal Surfaces.”Materials. 2022, 15(21): 7407. (SCI, IF: 3.748/2021). Link Fei Wang, Yihao Zhou, Xuan Zhang, Zhijie Li, Jiexin Weng, Guiyan Qiang, Mingjun Chen, et al. “Laser-induced thermography: An effective detection approach for multiple-type defects of printed circuit boards (PCBs) multilayer complex structure.”Measurement. 2023, 206: 112307. (SCI, IF: 5.6/2022). Link Guangzhou Wang, Tianyu Yu, Xingying Zhou, Ruiyang Guo, Mingjun Chen*.“Investigation on minimum uncut chip thickness and size effect in micro milling of glow discharge polymer (GDP).”Journal of Manufacturing Processes. 2022, 84: 786-797. (SCI, IF: 5.684/2021). Link Bo Hou, Chunya Wu*, Henan Liu, Ruijiang Sun, Xiguang Li, Chang Liu, Jiahao Wu, Mingjun Chen*. “Shape approximation of sessile droplet by the equivalence between vertical capillary force and hydrostatic pressure.”Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2023, 656: 130203. (SCI, IF: 5.2/2022). Link Guotai Li, Tianyu Yu*, Ning Zhang, Mingjun Chen. “The effect of Ni content on phase transformation behavior of NiTi alloys: An atomistic modeling study.”Computational Materials Science. 2022, 215: 111804. (SCI, IF: 3.572/2021). Link Ruiyang Guo, Mingjun Chen*, et al. “Milling force prediction and optimization of process parameters in micro-milling of glow discharge polymer.”The International Journal of Advanced Manufacturing Technology. 2022, 122(3-4): 1293-1310. (SCI, IF: 3.563/2021). Link Jian Cheng*, Yunhao Xing, Enjie Dong, Linjie Zhao, Henan Liu, Tingyu Chang, Mingjun Chen, et al. “An Overview of Laser Metal Deposition for Cladding: Defect Formation Mechanisms, Defect Suppression Methods and Performance Improvements of Laser-Cladded Layers.”Materials. 2022, 15(16): 5522. (SCI, IF: 3.748/2021). Link Wenyu Ding, Jian Cheng*, Linjie Zhao, Zhenhua Wang, Hao Yang, Zhichao Liu, Qiao Xu, Jian Wang, Feng Geng, Mingjun Chen*. “Determination of intrinsic defects of functional KDP crystals with flawed surfaces and their effect on the optical properties.”Nanoscale. 2022, 14(28): 10041-10050. (SCI, IF: 8.307/2021). Link Tianyu Yu*, Mingjun Chen, et al.“Experimental and numerical study of deposition mechanisms for cold spray additive manufacturing process.”Chinese Journal of Aeronautics. 2022, 35(2): 276-290. (SCI, IF: 4.061/2021). Link Yanan Liu, Ye Ding, Jichang Xie*, Mingjun Chen, et al. “Research on Monocrystalline Silicon Micro-Nano Structures Irradiated by Femtosecond Laser.”Materials. 2022, 15(14): 4897. (SCI, IF: 3.748/2021). Link Wei Li, Xueyan Zhu, Xiaochun Wang, Fei Wang*, Junyan Liu*, Mingjun Chen, et al. “Segmentation and accurate identification of large carious lesions on high quality x-ray images based on Attentional U-Net model. A proof of concept study.”Journal of Applied Physics. 2022, 132(3). (SCI, IF: 2.877/2021). Link Xianglin Meng, Fei Wang*, Junyan Liu*, Mingjun Chen, et al. “Phase shifting profilometry based on Hilbert transform: An efficient phase unwrapping algorithm.”Journal of Applied Physics. 2022, 131(19). (SCI, IF: 2.877/2021). Link Fei Wang, Zhuoyan Yue, Junyan Liu*, Hong Qi, Wenjun Sun, Mingjun Chen, et al. “Quantitative imaging of printed circuit board (PCB) delamination defects using laser-induced ultrasound scanning imaging.”Journal of Applied Physics. 2022, 131(5). (SCI, IF: 2.877/2021). Link Fei Wang, Lianjun Wu*, Xiaochun Wang*, Yuming Liang, Junyan Liu*, Mingjun Chen, et al.“Accurate identification and detection of occlusal/smooth early caries using thermal-wave radar imaging (TWRI) technique under low temperature rising condition.”Measurement. 2022, 188: 110517. (SCI, IF: 5.131/2021). Link Mingyu Gao, Fei Wang*, Junyan Liu*, Peng Song, Jianfeng Chen, Hong Yang, Hongbo Mu, Dawei Qi, Mingjun Chen, et al. “Estimation of the convolutional neural network with attention mechanism and transfer learning on wood knot defect classification.”Journal of Applied Physics. 2022, 131(23). (SCI, IF: 2.877/2021). Link Xiaoxu Rong, Jianghao Zhao, Zhuoyan Yue, Fei Wang*, Junyan Liu*, Yong Zhang, Guiyan Qiang, Jingxiang Sun, Jiacheng Wei, Yang Wang, Mingjun Chen, et al. “Rapid detection for the surface and hidden crack of solid propellant motor charge using laser arrays scanning thermography (LAsST).”Infrared Physics & Technology. 2022, 125: 104321. (SCI, IF: 2.997/2021). Link 2021 Zican Yang, Jian Cheng, Mingjun Chen, et al. “Formation mechanism of bubbles in the crack healing process of fused silica using a CO2 laser.” Optics Express. 2021, 29 (20): 32089-32104. (SCI, IF: 3.833/2021). Link Qi Liu, Mingjun Chen, Zhirong Liao, et al. “On the improvement of the ductile removal ability of brittle KDP crystal via temperature effect.” Ceramics International. 2021, 47 (23): 33127-33139. (SCI, IF: 5.532 /2021). Link Yang Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*.“Application of Light Diffraction Theory to Qualify the Downstream Light Field Modulation Property of Mitigated KDP Crystals.” Opt Laser Technol, 2021, 138: 106873. (SCI, IF:3.233/2019). Link Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al.“Formation Mechanism of Surface Morphology in the Process of CO2 Pulsed Laser Processing of Fused Silica Optics.” Opt Laser Technol, 2021. 138: 106838. (SCI, IF:3.233/2019). Link Zhao Linjie, Jian Cheng, Zhaoyang Yin, Hao Yang, Mingjun Chen*, and Xiaodong Yuan. “Research on Precision Automatic Tool Setting Technology for KDP Crystal Surface Damage Mitigation Based on Machine Vision.” J Manuf Process, 2021. 64: 750–757. (SCI, IF: 4.086/2019). Link Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al.“Physical Mechanism of Pulsed Laser Interaction with Fused Silica Optics during CO2 Laser Mitigation Process.” J Non Cryst Solids, 2021. 558: 120662. (SCI, IF: 2.929/2019). Link Hou Bo, Chunya Wu, Xiguang Li, Junjie Huang, and Mingjun Chen*. "Contact Line-Based Model for the Cassie-Wenzel Transition of a Sessile Droplet on the Hydrophobic Micropillar-Structured Surfaces." Appl Surf Sci, 2021. 542: 148611. (SCI, IF: 6.182/2019). Link Wang Tingzhang, Henan Liu, Chunya Wu, Jian Cheng, Tianyu Yu, and Mingjun Chen*. “Wear Characteristics of Small Ball-End Fine Diamond Grinding Pins Dressed by on-Machine Electrical Discharge.” Wear, 2021. 203765. (SCI, IF: 4.108/2019). Link Liu Qi, Zhirong Liao, Jian Cheng, Dongdong Xu, and Mingjun Chen*. "Mechanism of Chip Formation and Surface-Defects in Orthogonal Cutting of Soft-Brittle Potassium Dihydrogen Phosphate Crystals." Mater Des, 2021. 198: 109327. (SCI, IF: 6.289/2019). Link Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al. “Combined Studies of Surface Evolution and Crack Healing for the Suppression of Negative Factors during CO2 Laser Repairing of Fused Silica.” Chin Opt Lett, 2021. 19 (4): 41402. (SCI, IF: 2.045/2019). Link 2020 Yu, Tianyu, Mingjun Chen*, and Zhuoru Wu. “Experimental and Numerical Study of Deposition Mechanisms for Cold Spray Additive Manufacturing Process.” Chinese Journal of Aeronautics. 2021. (SCI, IF: 2.215/2019). Link Yu, Tianyu, Junyan Liu, Yu He, Jinchuan Tian, Mingjun Chen*, and Yang Wang. "Microstructure and Wear Characterization of Carbon Nanotubes (CNTs) Reinforced Aluminum Matrix Nanocomposites Manufactured Using Selective Laser Melting." Wear, 2020. 203581. (IF: 4.108/2019). Link Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*. "Potential Damage Threats to Downstream Optics Caused by Gaussian Mitigation Pits on Rear KDP Surface." High Power Laser Science and Engineering, 2020. 8 (4). (SCI, IF: 2.606/2019). Link Wang, Tingzhang, Henan Liu, Chunya Wu, Jian Chen, and Mingjun Chen*. “Interference and Grinding Characteristics in Ultra-Precision Grinding of Thin-Walled Complex Structural Component Using a Ball-End Grinding Wheel.” Chinese Journal of Aeronautics, 2021. 34 (4): 192–207. (SCI, IF: 2.215/2019). Link Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*. “Model Development for Nanosecond Laser-Induced Damage Caused by Manufacturing-Induced Defects on Potassium Dihydrogen Phosphate Crystals.” ACS Omega, 2020. 5 (31): 19884–95. (SCI, IF:2.87/2019). Link 赵林杰,程健,陈明君*,袁晓东,等. 熔石英光学元件的CO2激光加工技术研究新进展[J].机械工程学报, 2020,56(11):202-218. (EI). Zhao, Linjie, Jian Cheng, Zhaoyang Yin, Hao Yang, Qi Liu, Chao Tan, Wei Liao, Mingjun Chen*, and Xiaodong Yuan. "Rapid CO2 Laser Processing Technique for Fabrication of Micro-Optics and Micro-Structures on Fused Silica Materials." Proc Inst Mech Eng B J Eng Manuf. 2020. (SCI, IF:1.982/2019). Link Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Jian Wang, and Mingjun Chen*. “Dynamic Behavior Modeling of Laser-Induced Damage Initiated by Surface Defects on KDP Crystals under Nanosecond Laser Irradiation.” Scientific Reports, 2020.10(1): 500. (SCI, IF:3.998/2019). Link Zhao, Linjie, Jian Cheng, Mingjun Chen*, Xiaodong Yuan, et al. “Formation Mechanism of a Smooth, Defect-Free Surface of Fused Silica Optics Using Rapid CO2 Laser Polishing.”International Journal of Extreme Manufacturing, 2019. 1(3): 35001.(ESCI) Link Tan, Chao, LinJie Zhao, Chen Mingjun*, Jian Cheng, et al. Optical Modulation of Repaired Damage Site on Fused Silica Produced by CO2 Laser Rapid Ablation Mitigation. Chin. Phys. B 2020, 29(5) : 54209-054209.(SCI, IF=1.223/2019) Link Tan, Chao, Linjie Zhao, Chen Mingjun*, Jian Cheng, and Wei Liao. "Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation." Results in Physics 16 (2020): 102936. (SCI, IF=4.019/2019)Link Wang Tingzhang, Wu Chunya, Liu Henan, Chen Mingjun*, Cheng Jian, Su Dingning, et.al. On-machine electric discharge truing of small ball-end fine diamond grinding wheels, Journal of Materials Processing Technology, 2020,277:116472 (SCI, IF=4.669/2019)Link Wang Tingzhang, Liu Henan, Wu Chunya, Cheng Jian, Chen Mingjun*. Three-dimensional modeling and theoretical investigation of grinding marks on the surface in small ball-end diamond wheel grinding, International Journal of Mechanical Science, 2020, 173: 105467(SCI, IF=4.631/2019)Link 2019 Wang Tingzhang, Wu Chunya, Liu Henan, Chen Mingjun*, Cheng Jian, Fang Zhen, Yu Bo. Configuration design and accuracy analysis of special grinding machine for thin-walled small concave surfaces, Precision Engineering, 2019, 56: 293-302. (SCI, IF=3.108/2019)Link Wang Tingzhang, Cheng Jian, Liu Henan, Chen Mingjun*, Wu Chunya, Su Dingning. Ultra-precision grinding machine design and application in grinding thin-walled complex component with small ball-end diamond wheel, The International Journal of Advanced Manufacturing Technology,2019, 101:2097–2110. (SCI, IF:3.108/2019)Link Wu Chunya, Zhu Qing, Zheng Ting, Yang Xiaonan, Wang Tingzhang, Hou Bo, He Xiaodong, Luo Guan, Li Shangbin, Chen Mingjun*. Experimental and theoretical investigations on the adherent behaviors of high viscosity liquid: The effect of surface topography[J]. Fluid Phase Equilibria, 2019, 486: 11-20. (SCI, IF=2.514/2018)Link Wu Chunya, Zhu Qing, Zheng Ting, Guo Chuangqiang, Wang Tingzhang, Hou Bo, He Xiaodong, Luo Guan, Li Shangbin, Chen Mingjun*. Molecular investigation of adsorption behaviors of hydroxyl-terminated polybutadiene (HTPB) binders onto copper surface: The effects of aluminum nanoparticles[J]. Applied Surface Science, 2019, 486: 383-393. (SCI, IF=5.155/2018)Link Liu Qi, Cheng Jian, Yang Hao, Xu Yafei, Zhao Linjie, Tan Chao, Chen Mingjun*. Modeling of residual tool marks formation and its influence on the optical performance of KDP optics repaired by micro-milling. Optical Materials Express, 2019, 9:3789-3807. (SCI, IF: 2.673/2018)Link Liu Qi, Cheng Jian, Liao Zhirong, Yang Hao, Zhao Linjie, Chen Mingjun*. Incident laser modulation by tool marks on micro-milled KDP crystal surface: Numerical simulation and experimental verification. Optics and Laser Technology, 2019, 119:105610. (SCI, IF: 3.319/2018) Link Zhao Linjie, Cheng Jian, Chen Mingjun*, Yuan Xiaodong, Liao Wei, Wang Haijun, Liu Qi, Yang Hao. Toward little heat-affected area of fused silica materials using short pulse and high power CO2 lasers [J]. Results in Physics, 2019, 12, 1363-1371.(IF:3.042/2018)Link Cheng Jian, Yang Hao, Liu Qi, Zhao Linjie, Liu Zhichao, Liu Henan, Wang Tingzhang, Xiao Yong, Hu Kehui, Chen Mingjun*, Tan Jiubin. Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal[J]. Results in Physics, 2019, 15: 102753.(IF:3.042/2018)Link 2018 Cheng Jian, Xiao Yong, Liu Qi, Yang Hao, Zhao Linjie, Chen Mingjun*, Tan Jiubin, Liao Wei, Chen, Jing, Yuan Xiaodong. Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal [J]. Material& Design, 2018,157: 447-456. (IF:4.525/2017)Link Zheng Ting, Wu Chunya, Zhang Yu, Chen Mingjun*, Cummings, Peter T. Molecular Investigation of the Initial Nucleation of Calcium Phosphate on TiO2 Substrate: The Effects of Surface Nanotopographies [J] Crystal Growth & Design, 2018, 18(6): 3283-3290. (IF:3.972/2017)Link Wang Tingzhang, Cheng Jian, Liu Henan, Chen Mingjun*, Wu Chunya, Fang Zhen, Yu Bo. Effects of kinematic parameters on electric discharge truing of small ball-end diamond wheels for small concave surfaces grinding [J]. Precision Engineering, 2018,51: 117-127.(IF:3.108/2019)Link Chen Ni, Wu Chunya, Chen Mingjun*, Li Liang, He Ning. Research on the Relationship between Cutting Force and Machined Surface Quality in Micro Ball End-Milling of Potassium Dihydrogen Phosphate Crystal [J]. Micromachines, 2018, 9: 11. (IF:2.222/2017)Link Liu Qi, Cheng Jian, Xiao Yong, Chen Mingjun*, Yang Hao, Wang Jinghe. Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling. The International Journal of Advanced Manufacturing Technology 2018, 99, 2777-2788. (SCI, IF:2.496/2018)Link 2017 Chen Ni, Chen Mingjun*, Wu Chunya, Pei Xudong, Qian Jun, Reynaerts Dominiek. Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal [J]. International Joural of Mechanical Sciences, 2017, 134: 387-398. (IF:3.570/2017)Link Chen Ni, Chen Mingjun*, Wu Chunya, Pei Xudong. Cutting surface quality analysis in micro ball end-milling of KDP crystal considering size effect and minimum undeformed chip thickness [J]. Precision Enginerring, 2017, 50:410-420. (IF:2.582/2017)Link Yang Hao, Cheng Jian, Cheng Mingjun*, Wang Jian, Liu Zhichao, An Chenhui, Zheng Yi, Hu Kehui, Liu Qi. Optimization of morphological parameters for mitigation pits on rear KDP surface: experiments and numerical modeling [J]. Optics Express, 2017, 25(15):18332-18345. (IF:3.356/2017)Link Chen Mingjun*, Liu Henan, Cheng Jian, Yu Bo, Fang Zhen. Model of the material removal function and an experimental study on a magnetorheological finishing process using a small ball-end permanent-magnet polishing head [J]. Applied Optics, 2017, 56(19):5573-5582. (IF:1.791/2017)Link 2016 Zheng Ting, Wu Chunya, Chen Mingjun*, et al. A DFT study of water adsorption on rutile TiO2 (110) surface: The effects of surface steps [J]. The Journal of chemical physics, 2016, 145(4): 044702. (IF:2.843/2017)Link Zheng Ting, Wu Chunya, Chen Mingjun*, et al. Molecular mechanics of the cooperative adsorption of a Pro-Hyp-Gly tripeptide on a hydroxylated rutile TiO 2 (110) surface mediated by calcium ions[J]. Physical Chemistry Chemical Physics, 2016, 18(29): 19757-19764. (IF: 3.906/2017)Link Chuangqiang Guo, Chunya Wu, Mingjun Chen*, Ting Zheng, Ni Chen, Peter T. Cummings. Molecular modeling of fibronectin adsorption on topographically nanostructured rutile (110) surfaces. Applied Surface Science, 2016, 384:36–44. (IF: 4.439/2017)Link Jian Cheng, Mingjun Chen*, Kyle Kafka, Drake Austin, Jinghe Wang, Yong Xiao and Enam Chowdhury. Determination of ultra-short laser induced damage threshold of KH2PO4 crystal: Numerical calculation and experimental verification. AIP Advances. 2016, 6(3): 035221. (IF: 1.653/2017)Link Henan Liu, Mingjun Chen*, Bo Yu, et al. Configuration design and accuracy analysis of a novel magnetorheological finishing machine tool for concave surfaces with small radius of curvature. Journal of Mechanical Science and Technology, 2016, 30(7): 3301-3311. (IF: 1.194/2017)Link Zhenhai Xu, Yihui Zhao, Lin Yuan, Yi Qin, Mingjun Chen*, Debin Shan. The compensational boundary method to calculate the projected contact area of nanoindentation in atomistic simulations. Computational Materials Science, 2016, 112:185-192 (IF: 2.530/2017)Link Ni Chen, Mingjun Chen*, Chunya Wu, Yanqiu Guo, Yanan Wang. The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal. Precision Engineering, 2016, 43:345-355 (SCI IF: 1.517/2014)Link 2015 Chen, MJ*; Cheng, J; Yuan, XD; Liao, W; Wang, HJ; Wang, JH; Xiao, Y; Li, MQ. Role of tool marks inside spherical mitigation pit fabricated by micro-milling on repairing quality of damaged KH2PO4 crystal, Scientific Reports, 2015, 5: 14422 (SCI IF: 5.578/2014)Link Mingjun Chen*, Ni Chen, Yanqiu Guo, Chunya Wu, Xuebin Wang. Study on the carbide tool wear mechanisms in micro milling stair-shape target of LiF crystal. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, DOI: 10.1007/s00170-015-7779-6 (SCI IF: 1.458/2014)Link Mingjun Chen*, Henan Liu, Yinrui Su, Bo Yu, Zhen Fang. Development of a Magnetorheological Finishing Machine for Small-Bore Part of Irregular Shape and Experimental Study. International Journal of Advanced Manufacturing Technology 2015; DOI:10.1007/s00170-015-7573-5 (SCI IF: 1.458/2014)Link Zhenhai Xu, Quanren Zeng, Lin Yuan, Yi Qin, Mingjun Chen*, Debin Shan. Molecular dynamics study of the interactions of incident N or Ti atoms with the TiN(001) surface. APPLIED SURFACE SCIENCE, 2015, DOI: 10.1016/j.apsusc.2015.11.090 (SCI IF: 2.711/2014)Link Wu, Chunya; Chen, Mingjun*; Zheng, Ting; et al. Effect of surface roughness on the initial response of MC3T3-E1 cells cultured on polished titanium alloy, Bio-Medical Materials and Engineering, 2015, 26(S1): S155-S164 (SCI IF: 1.091/2014)Link 2014 Chen, N; Chen, MJ*; Guo, YQ; Wang, XB. Effect of cutting parameters on surface quality in ductile cutting of KDP crystal using self-developed micro PCD ball end mill, The International Journal of Advanced Manufacturing Technology 78(1-4): 221-229 (SCI IF: 1.458/2014)Link Xiao, Y, Chen, MJ*, Yang, YT, Cheng, J. Research on the critical condition of brittle-ductile transition about micro-milling of KDP crystal and experimental verification. International Journal of Precision Engineering and Manufacturing 16(2):351-359. (SCI IF: 1.458/2014)Link Cheng, J; Chen, MJ*; Liao, W; Wang, HJ; Wang, JH; Xiao, Y; Li, MQ. Influence of surface cracks on laser-induced damage resistance of brittle KH2PO4 crystal. Optics Express, 2014, 22(23), 28740-28755 (SCI IF: 3.488/2014) Link Chen, Mingjun*; Zheng, Ting; Wu, Chunya; Xing, Cheng. Molecular dynamics simulations of collagen adsorption onto grooved rutile surface: The effects of groove width. Colloids and Surfaces B: Biointerfaces 2015, 121: 150-157 (SCI IF: 4.152/2014)Link Xiao, Y; Chen, MJ*; Cheng, J; Liao, W; Wang, HJ; Li, MQ. Effect of structural parameters of Gaussian repaired pit on light intensity distribution inside KH2PO4 crystal. Chinese Physics B,2014,Vol.8(23), 1674-1056 (SCI IF: 1.603/2014)Link Chen, MJ*; Xiao, Y; Tian, WL; Wu, CY; Chu, X. Theoretical and experimental research on error analysis and optimization of tool path in fabricating aspheric compound eyes by precision micro milling. Chinese Journal of Mechanical Engineering, 2014, 27(3)558-566 (SCI IF:0.598/2014)Link 2013 Cheng, J; Chen, MJ*; Liao, W; Wang, HJ ; Xiao, Y ; Li, MQ. Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induced light intensification. Optics Express, 2013, 21 (14): 16799-16813 (SCI IF: 3.488/2014)Link Chen, MJ*; Li, MQ; Xiao, Y; Pang, QL. Study on the optical performance and characterization method of texture on KH2PO4 surface processed by single point diamond turning. Applied Surface Science, 2013, 279(8) 233-244 (SCI IF: 2.711/2014)Link Chen, MJ*; Li, Z ; Yu, B; Peng, H ; Fang, Z. On-machine Precision Preparation and Dressing of Ball-headed Diamond Wheel for the Grinding of Fused Silica. Chinese Journal of Mechanical Engineering, 2013, 26(5) 982-987 (SCI IF: 0.598/2014)Link Xiao, Y; Chen, MJ*; Tian, WL. Research on accuracy analysis and performance verification test of micro-precise five-axis machine tool. International Journal of Advanced Manufacturing Technology, 2013, Vol.67 (1-4) 387-395 (SCI IF: 1.458/2014)Link Li, MQ ; Chen, MJ* ; Cheng, J; Xiao, Y; Jiang, W. Two important mechanisms damaging KH2PO4 crystal processed by ultraprecision fly cutting and their relationships with cutting parameters. Applied Optics, 2013 Vol.52 (15) 3451-3460 (SCI IF: 1.784/2014)Link Chen, MJ*; Li, MQ ; An, CH ; Zhou, L ; Cheng, J ; Xiao, Y ; Jiang, W . Influence of Light Intensification by Subsurface Cracks on KH2PO4 Crystal's Laser Induced Damage Threshold. Japanese Journal of Applied physics, 2013, Vol.52 (3) 032701 (SCI IF: 1.127/2014)Link Zheng, T ; Wu, CY ; Chen, MJ*. Early adsorption of collagen on the reduced rutile (110) surface mediated by water: A molecular dynamics study. Surface Science, 2013, 616 (10) : 51-59 (SCI IF: 1.925/2014)Link Wu, CY; Chen, MJ*; Skelton, AA; Cummings, PT; Zheng, T. Adsorption of Arginine-Glycine-Aspartate Tripeptide onto Negatively Charged Rutile (110) Mediated by Cations: The Effect of Surface Hydroxylation. ACS Applied Materials & Interfaces, 5 (7): 2567-2579, 2013 (SCI IF: 6.723/2014)Link 2012 Jiaxuan Chen, Yingchun Liang, Mingjun Chen*, Liquan Wang. Multi-Path Nanometric Cutting of Molecular Dynamics Simulation. Journal of Computational and Theoretical Nanoscience. 2012, 9(9SI): 1303-1308. (SCI IF: 1.343/2014)Link Mingjun Chen*, Jian Cheng, Mingquan Li, Yong Xiao. Study of modulation property to incident laser by surface micro-defects on KH2PO4 crystal. Chinese Physics B. 2012, 21(6): 064212. (SCI IF: 1.603/2014)Link Mingjun Chen*, Gaobo Xiao, Lihua Lu, Chunya Wu. Mechanism of Chip-Formation in Nanometric Cutting of Single-Crystal Copper by Molecular Dynamics. Journal of Computational and Theoretical Nanoscience. 2012, 9(1): 110-116. (SCI IF: 1.343/2014)Link Mingjun Chen*, Haibo Ni, Zhijun Wang, Yan Jiang. Research on the modeling of burr formation process in micro-ball end milling operation on Ti-6Al-4V. International Journal of Advanced Manufacturing Technology. 2012, 62(9-12): 901-912. (SCI IF: 1.458/2014)Link Mingquan Li, Mingjun Chen*, Chenhui An, Lian Zhou, Jian Cheng, Yong Xiao, Wei Jiang. Mechanism of micro-waviness induced KH2PO4 crystal laser damage and the corresponding vibration source. Chinese Physics B. 2012, 21(5): 050301. (SCI IF: 1.603/2014)Link 2011 Wu, Chunya, Skelton, Adam A. , Chen, Mingjun*, Vlcek, Lukas, Cummings, Peter T. Modeling the interaction between integrin-binding peptide (RGD) and rutile surface: The effect of Na+ on peptide adsorption. Journal of Physical Chemistry C. 2011, 115(45): 22375-22386. (SCI IF: 4.772/2014)Link Mingjun Chen*, Mingquan Li, Jian Cheng, Wei Jiang, Jian Wang, Qiao Xu. Study on characteristic parameters influencing laser-induced damage threshold of KH2PO4 crystal surface machined by single point diamond turning. JOURNAL OF APPLIED PHYSICS, 2011, 110: 113103. (SCI IF:2.183/2014)Link 2010 Chen MJ*, Li MQ, Jiang W Xu QA. Influence of period and amplitude of microwaviness on KH 2 PO 4 crystal’s laser damage threshold[J]. Journal of Applied Physics. 2010. Vol. 108 (4) 043109. (SCI IF:2.183/2013)Link Chen MingJun*, Xiao GaoBo, Chen JiaXuan, Wu ChunYa. Research on the influence of machining introduced sub-surface defects and residue stress upon the mechanical properties of single crystal copper. SCIENCE CHINA-TECHNOLOGICAL SCIENCES 2010, 53(12): 3161–3167. (SCI IF:1.192/2014)Link C. Y. Wu, M. J. Chen*, X. Cheng. Molecular Understanding of conformational dynamics of a fibronectin module on rutile (110) surface. Langmuir. 2010, 26(20): 15972-15981. (SCI IF:4.457/2013)Link D. P. Song, M. J. Chen*, Y. C. Liang, C. Y. Wu et al. Molecular dynamics simulation study on surface structure and surface energy of anatase. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. 2010, 18: 075002. (SCI IF:2.167/2014)Link Chen Ming-jun*, Jiang Wei, Li Ming-quan, Chen kuan-nun. Study of the near-field modulation property of microwaviness on a KH2PO4 crystal surface. Chinese physics. 2010, 19(6): 064203. (SCI IF: 1.603/2014)Link C. Y. Wu, M. J. Chen*, C. Q. Guo. Peptide-TiO2 interaction in aqueous solution: conformational dynamics of RGD using different water models. Journal of Physical Chemistry B. 2010, 114(13): 4692-4701. (SCI IF:3.377/2014)Link Guo YB, Liang YC, Chen MJ*. Molecular dynamics simulation of thermal effects in nanometric cutting process. Sci China Tech Sci. 2010, 53(3): 870-874. (SCI IF:1.113/2013)Link D. P. Song, M. J. Chen*, Y. C. Liang, Q. S. Bai, J. X. Chen, X. F. Zheng. Adsorption of tripeptide RGD on rutile TiO2 nanotopography surface in aqueous solution. Acta Biomaterialia. 2010, 6(2): 684-694. (SCI IF:6.792/2014)Link Mingjun Chen*, Chunya Wu, Daiping Song, Kai Li. RGD tripeptide onto perfect and grooved rutile surfaces in aqueous solution: adsorption behaviors and dynamics. Physical Chemistry Chemical Physics. 2010, 12(2): 406-415. (SCI IF:4.198/2014)Link 2009年及以前 Guo YB, Liang YC, Chen MJ*, Lu LH. Molecular dynamics simulations of nanomachining mechanism and thermal effects of single crystal Cu. Acta metallurgica sinica. 2009, 45(10):1199-1204. (SCI IF:0.540/2014)Link Chen MJ*, Wu CY, Song DP, Dong WM, Li K. Effect of grooves on adsorption of RGD tripeptide onto rutile TiO2(110) surface. Journal of Materials Science-Materials in Medicine. 2009, 20(9): 1831-1838. (SCI IF:2.587/2014)Link Liang YC, Chen JX, Chen MJ*, Song DP, Bai QS. Three-dimensional molecular dynamics simulation of nanostructure for reciprocating nanomachining process. Journal of Vacuum Science & Technology B. 2009, 27(3): 1536-1542. (SCI IF:1.464/2014)Link Liang YC, Song DP, Chen MJ*, Bai QS. Adsorption mechanism of arg-gly-asp on rutile TiO2 (110) surface in aqueous solution. Journal of Vacuum Science & Technology B. 2009, 27(3): 1548-1554. (SCI IF:1.464/ 2014 )Link Song, Dai-Ping; Liang, Ying- Chun; Chen, Ming-Jun*; Bai, Qing- Shun. Molecular dynamics study on surface structure and surface energy of rutile TiO2 (1 1 0). Applied Surface Science. 2009, 255(11): 5702-5708. (SCI IF:2.711/2014)Link Pen Hongmin, Liang Yingchun, Bai Qingshun, Chen Mingjun*. Multiscale simulation of nanometric cutting of single crystal copper-effect of different cutting speeds. Acta Metallurgica Sinica-ENGLISH LETTERS. 2009, 22(6): 440-446. (SCI IF:0.727/2014)Link Chen MJ*, Liang YC, Yuan YJ, et al. Deposition mechanism of nano-structured single-layered C-36 film on a diamond (100) crystal plane. Chinese Physics B. 2008, 17(11): 4260-4267. (SCI IF:1.603/2014)Link Liang YC, Chen JX, Chen MJ*, et al. Integrated MD simulation of scratching and shearing of 3D nanostructure. Computational Materials Science. 2008, 43(4): 1130-1140. (SCI IF: 2.131/2014)Link Liang YC, Chen JX, Bai QS, Tang YL, Chen MJ*. Molecular dynamics simulation of nanomachining process and mechanical properties of nanostructure. Acta Metallurgica Sinica. 2008, 44(8): 937-942. (SCI IF:0.540/2014)Link Chen JX, Liang YC, Bai QS, Tang YL, Chen MJ*. Researching Nanometric Cutting of Copper Based on Molecular Dynamics. Journal of Computational and Theoretical Nanoscience. 2008, 5(8): 1485-1489. (SCI IF: 1.343/2014)Link Chen MJ*, Pang QL, Wang JH, et al. Analysis of 3D microtopography in machined KDP crystal surfaces based on fractal and wavelet methods. International journal of machine tools and manufacture. 2008, 48(7-8): 905-913. (SCI IF:3.037/2014)Link Chen MJ*, Liang YC, Yuan YJ, et al. Influential factors of low-energy C-36 cluster deposition on diamond (100) crystal planet. Chinese Journal of Chemical Physics. 2007, 20(6): 637-642. (SCI IF: 0.498/2014) Link Liang YC, Chen JX, Chen MJ*, et al. Mechanical properties of machined nanostructures. Chinese Journal of Chemical Physics. 2007, 20(6): 649-654. (SCI IF:0.498/2014) Link Chen MJ*, Wang JH, Liang YC, et al. Research on influence of the cutter rake angle to the surface quality during SPDT machining of crystal KDP. Key Engineering Materials, 2007, 339: 1-5. (SCI IF:0.224/2005) Link Wang, JH; Dong, S; Wang, HX; Chen, MJ*; Zong, WJ; Zhang, LJ. Forecasting of surface roughness and cutting force in single point diamond turning for KDP crystal. KEY ENGINEERING MATERIALS 2006 Vol.339 78-83 (SCI IF:0.224/2005) Link Chen MJ*, Liang YC, Li HZ, et al. Molecular dynamics simulation on mechanical property of carbon nanotube torsional deformation. Chinese Physics. 2006, 15(11): 2676-2681. (SCI IF:0.924/2012) Link M. J. Chen*, Y. C. Liang, Wang, J. H., Dong, S. Research on influence of crystal KDP anisotropy on critical condition of brittle-ductile transition in ultra-precision cutting. Key Engineering Materials. 2006, 315-316: 725-730. (SCI IF:0.224/2005)Link Y. C. Liang. M. J. Chen*. Machining simulation and experimental research of complex surface parts based on the PMAC. Key Engineering Materials. 2006, 315: 753-758. (SCI IF:0.224/2005)Link M. J. Chen*, Q. L. Zhao, D. Li, S. Dong. The critical conditions of brittle-ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding. Journal of Materials Processing Technology. 2005, 168 (1): 75-82. (SCI IF:2.236/2014)Link M. J. Chen*, Y. C. Liang, Y. S. Sun. Research of the Technological Parameters Influencing on the Surface Quality of Micro Complex Surface. Key Engineering Materials. 2005, 291-292: 513-518. (SCI IF:0.224/2005)Link Q. L. Zhao, M. J. Chen*, Y. C. Liang, S. Dong, K. Cheng, Measurement and analysis of AFM-based nano-indentation on micro-machined silicon surface. Key Engineering Materials. 2004, 257-258: 39-44. (SCI IF:0.224/2005)Link M. J. Chen*, S. Dong, D. Li, F. H. Zhang. Factors Influencing the Surface Quality During Ultra-precision Grinding of Brittle Materials in Ductile Mode. Key Engineering Materials. 2004, 257-258: 201-206. (SCI IF:0.224/2005)Link J. Z. Zhang, D. Li,M. J. Chen*, S. Dong. An ultra-Low frequency parallel connection nonlinear isolator for precision instruments. Key Engineering Materials. 2004, 257-258: 231-236. (SCI IF:0.224/2005)Link M. J. Chen*, D. Li, S. Dong, F. H. Zhang. Research on the Influence of The Diamond Wheel Wears on Machining Accuracy During Large Depth-to-Diameter Ratio Ultra-precision Aspheric Grinding Process. Key Engineering Materials. 2004, 259-261: 312-317. (SCI IF:0.224/2005)Link M. J. Chen*, W. X. Guo, D. Li. Research of the complex surface algorithm based on recursive subdivision numeric control interpolation. Materials Science Forum. 2004, 471-472: 155-161. (SCI IF:0.339/2005)Link Mingjun Chen*, Dan Li, Shen Dong. Research on a large depth-to-diameter ratio ultra-precision aspheric grinding system. Journal of Materials Processing Technology. 2002, 129(1-3): 91-95. (SCI IF: 2.236 /2014)Link M. J. Chen*, Q. Zhao, S. Dong, D. Li. Development of an ultra-precision grinding system for machining optical aspheric components with a large depth diameter ratio. Proceeding of the institution of mechanical engineers Part B-Journal of Engineering Manufacture. 2002, 216(11): 1471-1480. (SCI IF: 0.954 /2014)Link 学生培养情况 名称 目前已指导博士生20名,已毕业12名,指导硕士生70余名,已毕业60余名; 毕业的博士生有8人在高校工作,如哈尔滨工业大学、重庆大学、南京航空航天大学等; 先后派遣5名博士生到美国范德堡大学、美国俄亥俄州立大学、比利时鲁汶大学、英国诺丁汉大学进行联合培养,并且与对方导师建立了良好的合作关系; 培养学生获得博士国家奖学金(7人)、硕士国家奖学金(5人); 培养学生获得省优秀毕业论文(1人)、省三好学生(1人)、校优秀博士论文(3人)、校优秀硕士毕业论文(18人); 目前本课题组有在站博士后5名。 获奖情况 名称 博士生赵林杰论文入选“新时代龙江优秀硕士、博士学位论文”(2022); 博士生赵林杰论文获哈尔滨工业大学校优秀博士论文(2022); 博士生陈妮论文获哈尔滨工业大学校优秀博士论文(2019); 博士生程健获中国科协”青年人才托举工程“计划(2018); 博士生陈妮,论文“KDP晶体修复用球头微铣刀及其对表面质量影响的研究”,荣获机械领域全国优秀博士论文奖---“上银机械优秀博士论文奖”铜奖(2018)(金奖1项、银奖2项、铜奖3项、优秀奖及佳作奖25项); 博士生程健,论文“KDP晶体表面微缺陷及其修复对抗激光损伤能力影响研究”,荣获机械领域全国优秀博士论文奖---“上银机械优秀博士论文奖”铜奖(2017)(金奖空缺、银奖1项、铜奖2项、优秀奖及佳作奖20项); 硕士研究生王廷章获得黑龙江省三好学生(2016); 博士生吴春亚论文获哈尔滨工业大学校优秀博士论文(2015); 硕士生肖勇论文获黑龙江省优秀硕士论文(2012)。 在读学生 名称 已毕业学生(部分) 名称 博士毕业生 硕士毕业生 讲授课程 名称 本科生课程: 《机械制造技术基础》课程负责人,主讲教师,省精品课程,机电工程学院全院专业基础课程。 《精密超精密加工技术》主讲教师,专业模块课,机械制造及其自动化先进制造技术专业模块课。 硕士生课程: 《机械制造自动化机构及其应用》课程负责人,主讲教师,学术型研究生专业课。 博士生课程: 《非线性光学材料超精密加工机理、工艺技术与装备》,博士生学术讲座。 教学成果 名称 2013.09,获黑龙江省高校师德先进个人荣誉称号; 2006.05,获哈尔滨工业大学优秀教师奖; 2005.12,获哈尔滨工业大学第一届青年教师教学比赛一等奖; 2005.09,获本科毕业设计指导教师优秀奖; 2002.05,获哈尔滨工业大学SMC教学二等奖。 教师 名称 姓名 职称 研究方向 联系方式 教授博士生导师 精密超精密加工技术与工艺装备 微纳米制造技术及其应用基础研究 工艺自动化、图像处理技术与装备 光学元件缺陷检测及控制、修复技术与装备 chenmj@hit.edu.cn0451-86403252 教授硕士生导师 精密超精密加工技术 机械加工自动化机构 精密隔振技术与控制 lid@hit.edu.cn0451-86416901个人主页 教授博士生导师 特定微纳结构表面的制备与界面性能评价 超精密加工装备研制及加工工艺探索 微刀具的设计、制备及性能评价 纳米颗粒与生物分子膜的相互作用微观行为研究 wuchunya1982@163.com0451-86403252个人主页 教授博士生导师 精密/超精密加工技术 光学加工(亚)表面完整性评价 激光复合加工技术 光学元件激光诱导损伤及精密微修复技术 cheng.826@hit.edu.cn0451-86403252个人主页 教授博士生导师 精密磨削、抛光技术及机理 增材制造技术 tianyuyu@hit.edu.cn个人主页 副研究员 超精密加工装备 自由曲面光学元件超精密磨抛工艺 auy131@126.com 助理教授 精密超精密加工技术与装备 激光加工技术 光学元件缺陷检测、修复技术与装备 zhaolinjie@hit.edu.cn 活动剪影 名称 陈明君教授主持中船七〇七研究所与哈工大机电工程学院合作框架签约仪式 第八届上银优秀机械博士论文奖颁奖典礼(陈妮博士荣获铜奖) 第七届上银优秀机械博士论文奖颁奖典礼(程建博士荣获铜奖) 2022年课题组毕业生赵林杰博士代表全体毕业生在博士毕业典礼发言。link 研学生活 名称 2019年中秋节活动——太阳岛之行 2019年毕业季活动之一 校园丽景 名称 招生信息 名称 每年拟招收9-10硕士生,7-8名博士生;课题组优秀博士生在博二至博三期间可与国外高水平大学进行联合培养1-2年,并进行优先推荐。课题方向如下: 基于机器深度学习的大口径光学元件表面微缺陷信息处理技术; 基于机器人作业的大口径光学元件智能操作关键技术与装备; 多自由度机器人作业下的表层微缺陷高效检测技术与装备。 大口径光学元件表面微缺陷激光修复装备及其数控系统的研制; 光学元件表面微纳污染物的边缘特征点提取算法及编程技术; 薄壁复杂曲面惯性器件的超精密加工技术与装备; 强激光加载下条件下光学元件表面微缺陷的诱导损伤机制与控制技术; 太赫兹微结构零件的超精密加工机理与精度控制技术; 大型激光装置用大口径曲面光学元件图像拼接编程技术; 多场复合光学曲面元件超精密加工装备的研制及轨迹优化控制编程技术; 晶体光学元件的能量沉积损伤机制及其对下游光学元件的影响机理与控制技术; 高端硬质合金刀具的参数一体化设计编程技术与加工性能优化; 复杂微结构零件多轴联动超精密加工装备研制及工艺研究; 复杂微结构零件超精密加工数控轨迹优化算法及其控制技术; 光学元件激光抛光加工机理及相关关键技术; 大口径光学元件修复装备间的数据传输与局域网络关联技术。